Theoryofwi Posted January 29, 2015 Share Posted January 29, 2015 Hello, so I found a lot of info on this online but wasn't quite sure on everything so I figured I'd make a post. Iv got a biocube 29 and it is kinda noisey. I'm gonna remove the false bottoms in chambers 1,2 tonight so the nitrates done build up. In chamber 2 all I have is a led and cheto? (The one with all th little balls that how on it). Oh, and my biocube filter. I tried raising the water level and that helped a little bit not a lot. Would a media basket help? I also noticed what looks to be a overflow drain from chamber 2 to 3 (where the return pump is). I read somewhere that should b blocked? I'm also gonna replace the fans but don't wann a spend 30 bucks on fans when I would like to get a whole led kit from rapid-led. Unless there are some cheap slient ones out there. I'll post pictures of th overflow drain I was talking about shortly. Thanks in advance Link to comment
jestep Posted January 29, 2015 Share Posted January 29, 2015 Media basket with filter floss about an inch below the overflow should quiet the water noise a lot. Link to comment
Theoryofwi Posted January 29, 2015 Author Share Posted January 29, 2015 here are a couple pics of that overflow drain thingy. and thank you so just ditch the biocube brand filters and use filter foss hey? Link to comment
jamescstein Posted January 29, 2015 Share Posted January 29, 2015 easiest wat to quiet it down.. raise the water level Link to comment
LongDoggy Posted January 29, 2015 Share Posted January 29, 2015 I assume you mean water noise. To reduce water noise, keep the water level high. It won't overflow, it's physically impossible. Remove bio balls also. Removing false floors won't do much for noise so long as you keep water level up. For the fans, well they will make noise. I suppose you could get some quiet PC fans and do a retrofit. Keep in mind, even if you do RapidLED, you still need the fans. Link to comment
Theoryofwi Posted January 29, 2015 Author Share Posted January 29, 2015 Ya no bio balls. I wanna remove the false floors to reduce nitrate build ups. Also I'm gonna make my own media basket outta plastic at work today. I'll post a pic of it when it's done Link to comment
Lawnman Posted January 29, 2015 Share Posted January 29, 2015 easiest wat to quiet it down.. raise the water level+1 Link to comment
Theoryofwi Posted January 30, 2015 Author Share Posted January 30, 2015 Yep I raised the level. Silent lol Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.