So I wanted to make a simple control box with on/off control for both channels and a place to house both mini drivers. I used a small project box and two toggle switches. The wires from the LEDs come in on one end and the power cords come in on the other end. I will be plugging the power cords into a basic timer so I can control on/off times that way as well if I choose, say if I am out of town for example. Here are some pictures of the control box as the build progressed. Please feel free to ask any questions regarding this build.
Project box with the two switches I already in placed:
I drilled some holes in the back plate for ventilation:
This is the inside of the box showing the two switches:
This is the wiring, I needed the soldering iron for these connections. The insulating tubing is used throughout:
With the two drivers in place:
Box completed, the whole project took me about one and a half hours: