Jump to content


Photo

PFL15's DIY Canopy


  • Please log in to reply
30 replies to this topic

#1
ProFlatlander15

ProFlatlander15

    Anti-Ipod

  • Members
  • 2,657 posts
  • Joined 04 Oct 2004
  • Plainville, CT

Ok, so I've been contemplating a new lighting system for a while now, and finally got the balls to start. It will be the same dual 150W Halides that are over my 29G now, but instead of PCs, it will be running T5s for actinic. It is my first time working with metal, so be nice.

The backboone of the structure. Some stock aluminum I had laying around.
Posted Image

Closeup of how it is hagning in there. I used mostly rivets on the project. The other side is identical.
Posted Image

A bracket that will sit on the T5 reflector rack to support the MH backbone. You'll see!
Posted Image

The T5 reflector setup. Notice the brackets where the MHs will sit.
Posted Image

T5 structure
Posted Image

Basics all together from the top.
Posted Image

Basics all together from the bottom.
Posted Image

The guts.
Posted Image



T5 ballast installed.
Posted Image

T5s wired, fans wired (minus the fans, they will be arriving from NewEgg shortly). You can see the AC adapter I plugged in there for the fans. The T5s and the fans will be wired from the same hot wire. The MHs will be separate.
Posted Image

Sheet aluminum cut to size... It's starting to come together...
Posted Image

Cover made of the same sheet. Since it is .02" thick, it is easy to bend and arcs nicely. I actually cut it with a razor blade and bent it by scribing it with a razor blade. I know there are better ways, but thats all I had around.
Posted Image

As far as I have gotten. 80% of the wiring is done, I am waiting on the fans and I have to do the MH wiring, but most of the rest is done.
Posted Image

I have about $100 of materials into this project, though I know it can be done with less. I made a few bad cuts on the auminum sheet and also remade some brackets to simplify my design. It is actually comming along better than I had expected. Comments, criticisms will be appreciated. Thanks guys.

#2
juin21

juin21

    Member

  • Members
  • 1,597 posts
  • Joined 20 Nov 2001
Looks nice!

#3
ProFlatlander15

ProFlatlander15

    Anti-Ipod

  • Members
  • 2,657 posts
  • Joined 04 Oct 2004
  • Plainville, CT
Thanks Juin!

#4
Matty1124

Matty1124

    nano-reef D-lister

  • Members
  • 3,183 posts
  • Joined 06 Dec 2006
  • Cleveland
wow this is nice... now those are skillz... that z at the end of skill means its really well done...

#5
wildernesstank

wildernesstank

    Nano Reefer

  • Members
  • 1,583 posts
  • Joined 03 Apr 2007
  • cali
cool

#6
neanderthalman

neanderthalman

    Two hands working can do more than a thousand clasped in prayer.

  • Members
  • 10,943 posts
  • Joined 11 Mar 2005
  • Pickering, ON
very sexy indeed. Good jorb! I'll be tagging along to see this one completed.
Posted Image
^^New Coral 2010-03-27^^

Posted Image

I looked down her shirt. *shrug* I ain't gay or nothin', but it's boobs. It's what you do.


#7
ProFlatlander15

ProFlatlander15

    Anti-Ipod

  • Members
  • 2,657 posts
  • Joined 04 Oct 2004
  • Plainville, CT
Ok, so I got the fans hooked up, and one side is covered. Good news is all I have to do now is wire the switches, cover up the last side, and put on the splashguard.

Bad news, I just started a summer class and it will proably take up all of my time.

I will try to keep updated pics.

#8
ProFlatlander15

ProFlatlander15

    Anti-Ipod

  • Members
  • 2,657 posts
  • Joined 04 Oct 2004
  • Plainville, CT
I did a little work throughout the week, so I figured I'd get some pictures up for you guys.

Here is a pic of the end of the fixture.
Posted Image

This is a pic of the template of other side of the fixture. This side will have switches to control the T5s and fans. Tou can see where I cut extra for tabs to be bent into the sides for a tight fit. I did alot of guesswork here, and it really paid off, both sides fit perfectly.
Posted Image

Edited by ProFlatlander15, 14 July 2007 - 05:42 AM.


#9
crrichey

crrichey

    Registered member

  • Members
  • 2,646 posts
  • Joined 12 Oct 2004
  • Phoenix, Arizona
So you will be sending me one just like it right?

Your diet lacks wholesome foodstuffs. Try adding some beer. Hans Dorn


#10
ProFlatlander15

ProFlatlander15

    Anti-Ipod

  • Members
  • 2,657 posts
  • Joined 04 Oct 2004
  • Plainville, CT
Ha, I wish I had the time to do some, but it is kinda expensive and very time consuming. I learned alot though, and if I had to do it again it would look much nicer.

Update: I had some faulty wiring I had to redo yesterday and the fans were rubbing on the metal, so I had to switch them around. Almost ready for painting though!

#11
ProFlatlander15

ProFlatlander15

    Anti-Ipod

  • Members
  • 2,657 posts
  • Joined 04 Oct 2004
  • Plainville, CT
Ok, so it's been a little while, but I have been steadily working on this thing, and I am almost done! I have about $150 into this project so far. Here's some updated pics:

The bottom of the canopy slides in via some bent metal grooves I made. The top part is not painted yet.
Posted Image

The grooves I am talking about:
Posted Image

Pretty much done for the most part:
Posted Image

This is how I plan on hanging it: I have steel wire with pulleys. I made loops at the end of the wire so I can pull it and hook it onto a hook, thus raising the canopy for maintainence, etc.
Posted Image

And the whole thing right now, showing the hanging system.
Posted Image

Should be done by the end of the week, but I was looking at my MH bulbs and they aren't lookin' good, so I might have to buy new ones.

Edited by ProFlatlander15, 13 August 2007 - 06:02 AM.


#12
spanko

spanko

    Somewhere there is a place where we belong.

  • Members
  • 8,256 posts
  • Joined 01 Feb 2007
  • Michigan
Tagging along to see the end product. Looking real nice so far.

#13
Kirin1

Kirin1

    Nano Reefer

  • Members
  • 753 posts
  • Joined 04 Jul 2006
  • Baltimore, MD
Wow, Significant DIY.

If I'm reading this right, you've built this for about 1/5 (20%) the cost of This Current USA Unit.

Tightness man, good work.

#14
ProFlatlander15

ProFlatlander15

    Anti-Ipod

  • Members
  • 2,657 posts
  • Joined 04 Oct 2004
  • Plainville, CT
Yea, but that's just materials. I already had the bubls, ballasts for the MH, and AC adapter and such. If you were to do this yourself you'd probably break even, or maybe save like $5.

Edit: Thanks guys

Edited by ProFlatlander15, 13 August 2007 - 09:09 AM.


#15
adinsxq

adinsxq

    hello kitty

  • Moderators
  • 14,523 posts
  • Joined 30 Sep 2002
  • CA, VA
a hundred times better than i could ever do :) nice work!

Long live the CM!


#16
Kirin1

Kirin1

    Nano Reefer

  • Members
  • 753 posts
  • Joined 04 Jul 2006
  • Baltimore, MD

Yea, but that's just materials. I already had the bubls, ballasts for the MH, and AC adapter and such. If you were to do this yourself you'd probably break even, or maybe save like $5.

Edit: Thanks guys


Ah, yes, therein lies the rub.

#17
ProFlatlander15

ProFlatlander15

    Anti-Ipod

  • Members
  • 2,657 posts
  • Joined 04 Oct 2004
  • Plainville, CT
...So I just dropped it. It's ready to be hung, and I dropped it. I hit the corner on the doorway (typical of me) and it fell.

A reflector is bent, and the back is a little kinked for absorbing the fall, but after another coat of paint it should be OK.

#18
ProFlatlander15

ProFlatlander15

    Anti-Ipod

  • Members
  • 2,657 posts
  • Joined 04 Oct 2004
  • Plainville, CT
So after a little TLC, I put an new coat of paint on, making this like the 4th or 5th coat, plus 2 coats of primer. It looks pretty good right now, I was gonna hang it today, but now I have to wait for the paint to dry again...

Posted Image

#19
Longinus

Longinus

    Home is where the reef is

  • Members
  • 601 posts
  • Joined 25 Apr 2007
Lookin good! Better than any DIY hood of mine would end up.

#20
stoney waters

stoney waters

    Rano Neefer

  • Members
  • 1,452 posts
  • Joined 29 Jan 2005
  • Illinois
NICE NICE VERY NICE.

To me its not about the money saved or spent. I wouldn't get the same satisfaction if I got an Aqua Medic for free. I think... :unsure:

#21
ProFlatlander15

ProFlatlander15

    Anti-Ipod

  • Members
  • 2,657 posts
  • Joined 04 Oct 2004
  • Plainville, CT
THanks guys. Stoney I agree with you 100%. It's about the fact that you can say you made it.

#22
ProFlatlander15

ProFlatlander15

    Anti-Ipod

  • Members
  • 2,657 posts
  • Joined 04 Oct 2004
  • Plainville, CT
So it took me a month of planning, and 2 months to finish it, but here it is: the finished product!

Just leveling it before it hangs on its own:
Posted Image

And all done, MH and T5s on. Man, the T5s by themselves are bright enough for my tank!
Posted Image

Enjoy!

Edited by ProFlatlander15, 19 August 2007 - 07:43 AM.


#23
tl_vang86

tl_vang86

    Nano Reefer

  • Members
  • 18 posts
  • Joined 30 Jan 2007
wow!! amazing diy lights. wish i had the skill for that!!

#24
ProFlatlander15

ProFlatlander15

    Anti-Ipod

  • Members
  • 2,657 posts
  • Joined 04 Oct 2004
  • Plainville, CT
Thanks man, actually it wasn't that hard. The hardest part was bending the aluminum.

#25
121a

121a

    Nano Reefer

  • Members
  • 4,723 posts
  • Joined 30 Aug 2006
  • Chicago,IL
this has to be one of the best DIY lighting systems EVER!
I'm going to try this for my 75g, I'll try to use wood and the cover it with aluminum

Main Tank: 150g Reef

Getting it back on track

http://www.nano-reef...grr-pics/page-2

 

121a's BridgeLux LED Powered RKL Controlled Aqueon 4gal- DISMANTLED
http://www.nano-reef...howtopic=302636

My T-5 Thread (good stuff)
http://www.nano-reef...?...=140511&hl=