andru24 Posted January 29, 2011 Share Posted January 29, 2011 Just got my DIY kit of 18 LEDs (8w/10b) with 2x Meanwell 60-48d drivers and 2 color dimming kit (2 pots and 1 powersupply). I've drawn out how I think the wiring goes... See image below. I am a little unsure of exactly how the potentiometer gets wired in so please let me know where my diagram is wrong. This is going on a 4.25 x 16 heatsink. Thanks in advance... Link to comment
Genj Posted January 29, 2011 Share Posted January 29, 2011 Yes correct. Enjoy your new LED! Link to comment
redfishsc Posted January 29, 2011 Share Posted January 29, 2011 Here is how you would do the potentiometer (with thanks to someone here on NR.com, whom I forget, for this image): Note that you just ignore the extra drivers, you get the point. Link to comment
andru24 Posted January 29, 2011 Author Share Posted January 29, 2011 Yes correct. Enjoy your new LED! Thanks. Here is how you would do the potentiometer (with thanks to someone here on NR.com, whom I forget, for this image): Note that you just ignore the extra drivers, you get the point. Cool thanks. Link to comment
Genj Posted January 29, 2011 Share Posted January 29, 2011 Here is how you would do the potentiometer (with thanks to someone here on NR.com, whom I forget, for this image): Note that you just ignore the extra drivers, you get the point. Oh yeah, that's right. I think I had too many Dogfish Head when I took a look at it. That diagram is right courtesy of me, evil, someone else from an older thread, and someone else that turned the neg wires green! LOL, I think we need to make it a sticky! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.