tank0211 Posted November 3, 2008 Share Posted November 3, 2008 I'm wondering if anyone has the measures (LxWxH) of the AC 20, 30 & 50? I'm mainly looking for the width, as I want to, possibly, put one on one of the short ends of a standard 5.5g tank. I am also wanting to know which ones of those would be big enough to hold a heater as well? It would be used as a fuge, to hold the heater & also for some chemipure if possible. Would one of these alone be enough flow for a 5.5g? The flow rates are 100, 150 & 200 respectively. Thanks much, ~B Link to comment
tank0211 Posted November 3, 2008 Author Share Posted November 3, 2008 google search gee thanks trav i know lots of peeps have these filters & how long could it take to throw a tape on it & reply?...sheesh Link to comment
tank0211 Posted November 4, 2008 Author Share Posted November 4, 2008 For any wondering here's the measures: Thank you for your inquiry. The measurements of the Hagen AquaClear Powerfilters are as follows: Model 20: 5" wide, 4" front to back, and 6" tall Model 30: 6" wide, 4" front to back, and 6" tall Model 50: 7" wide, 4" front to back, and 6" tall Model 70: 8" wide, 6" front to back, and 8" tall Link to comment
Hekim Posted November 5, 2008 Share Posted November 5, 2008 Just a little more info on these: AC 20, 30 and 50 - 2 1/2" of the width (front to back) is behind the tank. AC70 - 3 3/4" of its width (front to back) is behind the tank. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.