Search the Community

Hello Nano Reef I finally decided to pull the trigger and convert one of my planted tanks to a reef and I would like to document my progress/mistakes/help. Updated Equipment Tank: CADE, CB600, 60x45x45 (120L) Fixture: I'll be using an 4x24w ATI Powermodule (because I already have it). Bulbs: 2x blue +, purple + and actinic. Return pump: Jecod 6000dc Skimmer: Tunze 9004dc Doser: Coral Box wifi Reactor: Coral Box Bio Filtration: Marine Pure Flow: MP10qd ATO: Tunze 3155 Updated other gear Rowaphos Matrix Carbon Real Live Rock Quantum Reef Essential Mixed Macro Probiotic Salt Last weekend I took the tank to a guy who does commercial and domestic reef installations. He's drilling the tank for me and making a phantom overflow, a sump (65L) and he's going to wrap the rear panel with black vinyl. Can't wait to see how to turns out. It ought be done in 2 weeks time. A friend of mine had a epic 3ft nano reef a while back (Mike). So I'm picking his brain for advice as much as I can. I hope I can do the some here on this forum. Problem is, I don't know what I don't know. To rectify this I'm going through this forum reading heaps (really enjoying it), and I'm watching the BRS 52 week video series. I'm up to week 14. He skipped over sand pretty quick. I like the idea of black sand, but the BRS guy hints that it's not a good idea. Not 100% sure why. Anyway, I know people like pics so here's one of what the 2ft used to look like (my IAPLC entry this year) and one of my 3 tanks from last week.

TANK: 45g Shallow LIGHTING: 24" Reef Breeders V2+ w/2 Sunblaster T5's (ATI blue+ and ATI coral+) CONTROLLER: Apex Classic ATO: Tunze Osmolator FRESHWATER CONTAINER: Stock Cadlights 3 gallon POWERHEAD: Vortech MP-10QD RETURN PUMP: Reef Octopus VarioS-2 HEATER: (2) Ehiem 100w SKIMMER: Reef Octopus Classic 110s SUMP: Stock Cadlights 25 gallons (maybe) PLUMBING: Custom by yours truly. Added ball valves, check valve and break out unions. Bulk Reef Supply red pipe with grey and white fittings. I used 40lb of Billy's Reef Connection dry rock. For the cleaning method I used 1 week in RO/DI and bleach (10 gallons of water to 1 gallon of bleach). After that was 1 week in RO/DI and I added Seachem Prime twice. Then they dried out for 3 days in the sun before adding to tank. The rocks are said to have been "lab tested" and showed just trace amounts of phosphorus in the results so I trusted him and chose to not do muratic acid cure or the 2-3 months in Saltwater with GFO and water changes. Time will tell if I made a mistake or not. The sand bed is 30lbs of dry sand. I used Caribsea flamingo reef which was rinsed for about 1.5 hours until the water ran clear. So as of today the cycling process has been going on for 1 week. It's the usual......Lights off, skimmer off and 2 ppm of Dr. Tim's ammonia once and Dosing of Microbacter7 every day for the first 2 weeks and then wait. You know the drill............ i'll also be ditching the peg legs holding up my light right now. I just haven't bought the galvanized piping to build my own little arms to hang it from. FUTURE UPGRADES: Lighting for chaeto in the sump Salinity Probe and proper Apex module to run it More flow FTS: 11/14/18 FTS: 12/22/18

Looking for a used MP10qd in good condition please! If you can, please let me know the manufacture date, how long you used it for, and what setting. Picture would be appreciated to. Thanks so much!

March Feb FTS Sept: Previous FTS:

I have a Ecotech Vortech MP10wqd for sale. I believe it was manufactured in 2015 but was not used much. I would let it go for 210 shipped. Please no low ball offers only serious inquiries. I'll try to post pics later tonight. This is wireless.

Looking for a nice MP10. Let me know what you have. Thanks!