Search the Community
Showing results for tags 'm'.
Shorty Biggie's IM 20 Nano Reef Build Thread: Hello all, This is my first build thread and I am new to the community here. Mainly I am documenting this build thread for a few reasons. First and most importantly, I want to help those beginners or others who are still learning how to create functional and healthy reef tanks. I seek to document the entirety of my build, in order to help show the process rather than just the result. I know everything I have learned has been through researching others experiences online, so if this build is helpful to those in learning, this will be a success. With that being said I would not consider myself an expert or even advanced by any means. I have had experience with a 55 gallon, a 32 gallon, a 20 gallon, a 13 gallon, a 10 gallon and now back to this fusion 20. I have been able to have healthy tanks that did well, however I have never gotten far into corals. Ive bought corals in the LFS every once in awhile, but never took the time to learn how to properly test, supplement, care and grow corals, I pretty much have just thrown in the coral and let it be. Therefore, this will be a learning experience for me as well, and I hope documenting my build will bring others to this thread who can provide input and advice to further this build and not just help me, but others who use this thread as a guide to helping them build their ideal reef! With that being said lets get started! Background on this tank: Originally I planned a reefer 250 build, even saved up for it, and eventually had a change of heart. Since I had not dove deep into corals I decided to use a fusion 20 and all the equipment I had accumulated to set up a small tank with a larger budget and really take the time to focus on corals and learn before getting the reefer 250, so I didn't end up with an expensive tank full of rock with no money or experience for corals. I had a fusion 20 in the basement so I planned to use that, but once I pulled it out I noticed a large crack in the front right bottom corner, so I ordered another from BRS. Of course while emptying out the new tank from the leak test I bumped the bottom left back corner, however it was a small chip, not even 1/3 the way through the glass and only the size of the tip of a high lighter so I just went with it, thus far its totally fine, I'm not too concerned. This tank has been wet for 2 days, unfortunately I did not take pics of the set up, but im still very new in the process so most important info isn't missed Tank Info: Tank: Im Fusion 20 Light: Nanobox Duo Plus M (15 inch gooseneck) Stand: Ikea Besta Frame (I can post the specifics on every single part used if requested) Sand: Tropic Eden reefflakes, 1/2-3/4 deep, I like to stir the sandbed each water change Rock: CarribSea Life Rock roughly 14 pounds (already established from LFS store) Flow: Ecotech MP-10qd, Hydor Korilia 240, stock pump (may upgrade, please provide recommendations) x2 Spin stream nozzles Filtration: x2 InTank media baskets, running filter floss / purigen / chemipure elite in one, filter floss / Phosguard/ chemipure elite in the other Heater: Just an average aqueon heater; works well for me Top off: Tunze Osmolator 3155 Top off Container: 3.5 gallon plastic top fin tank Possible Future Equipment: -Sicee 1.5 Return Pump -IM Media Reactor -either IM Ghost Skimmer or Reef Glass skimmer -Neptune Apex (the cheaper one) -Neptune DOS Stocking Plans: Fish: x2 Picasso Clowns, 1 Atlantic Pygmy Cherub Angel Inverts: Small clean up crew, 1 fire shrimp, maybe 1 starfish (thoughts) Corals: Wide range of flowing corals, isolated GSP, acans, Ricordia, other lps and maybe some sps, what other corals would work well on my elevated rock work? Modifications: -small piece of lexan in between the screws for nano box and rear tank wall (I overtightened the screws on fusion 10 and busted the glass) -used wood glue on all connecting pieces of Ikea stand when building it To get up to speed on everything thus far I will give a run down. I first set up the stand. It is an Ikea Besta frame that is white on the sides and a gloss white finish on the doors. It fits the length of the tank perfectly and is just about an inch or so deeper to allow room for equipment off the back. I really like this stand because you are able to customize the stand color and doors and you can change the height of the stand. Im a tall guy, about 73 inches so I used a higher stand than what was available. The stand itself is about 40 inches tall and with the tank the top is 53 inches, perfect for a guy my height, as I don't have to bend way down to look into it. The stand is basically 2 pieces stacked on top of each other, secured by 4 metal braces, some sticky pads and wood glue. It is very strong, and fits perfect. Aside from using wood glue no other modifications are needed. Like I said the stand can be customized in the height for what works for you. I can link the parts if requested. In total,it cost about 190 dollars, much cheaper than the one IM offers, its stronger and customizable as well. I I have gotten all the supplies ready, and the day before the tank arrived I purchased the live rock from the LFS. The LFS is about 15 mins away so there shouldn't be much die off. While constructing the aquascape I kept the rock in 5 gallon buckets with saltwater, heaters and flow. The rock was never out of the water for more than 20 minutes, and since the rock was already seeded and established in a tank, Im not expecting much if any of a cycle. The tank has been filled for 2 days, and I have been ghost feeding and still have no ammonia, no nitrite, no nitrate, perhaps maybe slight nitrate, no more than 1-2ppm, if any at all. I called the LFS and said I am still not seeing any ammonia, should I throw in a shrimp or something to kick off the cycle? He told me there may well not be a cycle, and had me come in to get dirty water... I know DIRTY water. Basically he took the sponge out of one of the store tanks and wrang it out in a bag, which made the water turn a really gross and really brown looking color. He told me to put this in the tank and monitor the levels. However, I am trying to be cautious with this build, so I did not end up putting that water in my tank, I wanted to hear yall's opinion on this? Essentially the idea isn't to use that water to put a bunch of beneficial bacteria in the water, but to put a bunch of gross water in to feed the cycle and really build up the population to break down the large amount of waste in the water. Not sure if this is a good idea or if it will lead to problems later on or cause my tank to have a bunch of crud in it. Since I have been ghost feeding and still have no ammonia. I will probably wait a week and if still no ammonia I will proceed with livestock. As for concerns with this build, mainly right now it is flow. I plan on stocking a mixed reef, with multiple hammers and torches, plenty of ridordia, acans, and many other lps as well as maybe a few sps. Due to the rock work, I had to move the mp-10 closer to the front of the tank, therefore I put in a korillia in the back corner to eliminate deadspots behind the tank. Im worried this may be too much flow and the korillia may blast the corals on the top right side rock too hard, what do you guys think? Also, I plan on upgrading the return pump to a Sicee 1.5, but Im worried I may be putting too much flow in and will just be blasting all my corals, I don't really know. My final concern with flow is that the left side spin stream is kind of blocked from the tall rock on the left. I basically rotated the spin stream upside down so that its more to the top, and now when the spin stream is at the bottom of its rotation about half the flow coming from the nozzle hits the rock straight on, and the other half grazes over the top, should this be a concern? Thats all for the first post, thanks for reading, please follow along and provide input, ideas, advice! I will be posting just about everything I do, I plan/add in, and the progression of this nano😁