Search the Community
Showing results for tags 'ammonium'.
Found 2 results
I used to have a 150 G Fresh water aquarium back home and that one is now my mom's. Since I moved I've always wanted to start a new one and was a little scared about the salt water aquariums. After a couple of months researching, reading and watching a lot of videos I decided to start a Fluval 13.5 Evo Nano Reef Aquarium and I'm really excited to make it grow. I started my Aquarium just 5 days ago and I have done 3 testings so far. I have dry rock and Arag-alive Pink Fiji Sand. I used Dr Timm's Chloride Ammonia as indicated in the product and Fluval's Biological Enhancer to start the cycle. I've been reading online and Dr Timm's Cycle guide and it says that you shouldn't let the Ammonia levels go higher than 5.0 so I did a partial water change on my 3rd day of the cycle. These are my current testing readings I did them with the API Test Kit: I'm just wondering if the process is going right or If I should do something. I'm in no rush to finish the cycle but wanted to know if I should keep the lights on or off and if I should add more Bio enhancer or not. Thanks a lot! ---------- This is my setup so far:
Hello guys, So late last night, as so many bad stories, I started my tank cycle. I want to do what I can to prevent fish or inverts from getting hurt so I opted for a fishless cycle with bio-spira and ammonia. I purchased Ace's janitor ammoni. No surfactants and did the bubble test, looks good. I was having trouble finding the conversion online for ML of ammonia to gallons of water. I found a conversion of 15ML for a 30 gallon. So I figured I'd start at a third of that 5ml, test levels and titrate to get up to 4ppm. Well right from the start I was off the charts. My gut told me to just start with 1ml of ammonia and titrate to get to 4ppm but of course I didn't listen and here I am. So last night Ammonia: of the charts >8 ppm Nitrite: .25 ppm this morning, about 10 hours later (attached img) Ammonia: of the charts >8 ppm Nitrite: ~1-2 ppm Nitrate: 20 ppm I'll check the 3 levels again in 12 hours. Prepping freshwater to make more salteater. I imagine I'll need to do a huge water change, maybe 50% or more to get ammonia down to a measurable level? It looks like the bacteria is doing their thing I just don't know if those numbers of ammonia will end up stalling cycle (read differing opinions) and even if not, concerned about the potential side effects of so much ammonia in tank. Anyone been through this? I'm so annoyed, with myself. I've been pretty deliberate in my approach to this and usually err on the side of caution. But last night was stupid and I should've listen to that voice telling me what I should've done. But of course hindsight is 20/20 so I have to deal with the reality. I have a Biocube 32, ~30lbs of reefcleaners dryrock, 20lbs of caribsea arg-alive, RO/DI water from my brand new filter and Instan-Ocean salt (non-reef). Since I'm just cycling I'm only running heater, pump, powerhead and lights (I know there's different schools of thoughts on lights vs no-lights during cycle - I was leaning towards lights on but with all this ammonia maybe I should got back to dark). Any other info useful? I feel like I'm missing something here. Thanks so much in advance.