eep013 Posted July 10, 2006 Share Posted July 10, 2006 Does anyone have any advice on how to get a ricordia off of the rock it's attached to. I came close to just ripping it off the other day, but if there's a better way I'm open to suggestions. Thanks! Link to comment
sandlot13 Posted July 10, 2006 Share Posted July 10, 2006 i would take a really really sharp razor and try to scrape it off as close to the rock as possible........... do it in as close to one clean cut as possible, and then place the cut off ric in a low flow area so it can reattach itself with less problems. Rics can be pretty touchy, but this should work alright. ANd who knows, you might get another ric out of the remains on the rock!! Link to comment
proraptor2 Posted July 10, 2006 Share Posted July 10, 2006 Use a razor blade like sandlot said but cut through the rock and not the ric....Yes a razorblade will cut through rock but you might need to hit the razor blade with a hammer to do it... Link to comment
eep013 Posted July 10, 2006 Author Share Posted July 10, 2006 Thanks for the info. I'll probably try and chip around it and see what happens. Worst case scenario it was a very inexpensive plain green ric that I won't mind losing. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.