chrisyew Posted March 17, 2006 Share Posted March 17, 2006 Hi, I've got a 12O G nanocube (the old one with 4 chambers) and I wish to remove the lid. Could not find any screws to remove. Any idea how to remove the lid without damaging it. Thanks. Link to comment
Argent Posted March 17, 2006 Share Posted March 17, 2006 leave the lid closed -- stand behind tank and push lid away from you (or stand in front of it and pull lid towards you. It will take some muscles to get it to pop free (I thought I was going to break mine when I was doing it) Link to comment
skripo Posted March 17, 2006 Share Posted March 17, 2006 Put a flat blade screw driver between the hinge and the lid and twist or pry it out. Try to use a flat blade that is the width of the hinge . It is difficult but it should come loose with a loud pop. The pushing method may cause something else to break. Scary as hell but it works. Link to comment
chrisyew Posted March 18, 2006 Author Share Posted March 18, 2006 Thanks guys, will give it a try. I hope that means I should be able to put it back in good condition too lol. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.