808kb Posted February 26, 2006 Share Posted February 26, 2006 Does anyone know if the aquafuge ps (small) will fit over the back of an aquapod 24? I'm not as worried about the width as I am the amount of space is needed for the pump and exit pipe. I believe the width of the fuge is 19.25" , but the pump and tube is set in a bit. Thanks Link to comment
Fredy Posted February 28, 2006 Share Posted February 28, 2006 808kb, I have the PS small on the back of my 30 Cube. Between the two side walls of the tank I measured 18.5" (measured insided lip of top plastic bracing" I had to tilt the PH up a bit so it would fit. The measurement between the glass is 19.5". Hope the gives you some idea. I know it's not a aquapod but the measurements might help. Fredy Link to comment
cstewart79 Posted March 2, 2006 Share Posted March 2, 2006 do you have a canopy or closed lid on your pod or is it open? Link to comment
atwater Posted March 17, 2006 Share Posted March 17, 2006 808kb Have you installed the aquafuge Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.