doncb Posted March 26, 2005 Share Posted March 26, 2005 Is there any way to rewire the ballast or lamps on a NC 24g DX so the 2 lamps can be run on separate timers? I'd love to be able to have one lamp come on & then say 30 minutes later have the other one come on & then cycle off separately. I'd also want to separate the LED's off the lamps too. Thanks Link to comment
ccjung Posted March 26, 2005 Share Posted March 26, 2005 You can pop 2 PONY 126s in there and follow instructions from www.nanocustoms.com/catalog/pdf/324.pdf (the ballast wiring) youd basically have 2 ballasts in your stock Ballast enclosure. Chris Link to comment
ccjung Posted March 26, 2005 Share Posted March 26, 2005 Sorry, misnomer It should be 2 PONY 132 (36w) not PONY 126 (18/24/27w)... Chris Link to comment
doncb Posted March 26, 2005 Author Share Posted March 26, 2005 Originally posted by ccjung You can pop 2 PONY 126s in there and follow instructions from www.nanocustoms.com/catalog/pdf/324.pdf (the ballast wiring) youd basically have 2 ballasts in your stock Ballast enclosure. Chris So right now, both lamps are driven by one ballast? Bummer. Link to comment
doncb Posted March 28, 2005 Author Share Posted March 28, 2005 Originally posted by ccjung Unfortunately yes.. Chris Meant to reply sooner. Since I'm just getting the NC up & running I think I'll have to put off the mod (other things I need first!). I did check the cost of the ballast on nanocustoms.com & I'll probably order a couple later in the summer. Thanks for your replies! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.