MattGecko Posted March 18, 2005 Share Posted March 18, 2005 Originally posted by nanojake Do you have plans you'd be willing to share? I didn't want to Hi-jack the other thread............ NanoCube Stand: All main pieces are 3/4" oak ply-wood, I used 1/8" and 1/4" red oak around the edges. Also used 1/4 round oak molding on either side of the door to give it a nice rounded edge look. Sides: 13"w x 25 1/4"t Back: 11 1/2"w x 25 1/4"t Door: 13"w x 24 3/4" (+1/8" strip on top and bottom of the door, 25") Shelf: 11 1/2" x 11 1/2" (non adjustable) Top & bottom: 14"w x 14"L (side) & 15"L (in the center) Trim wood top and bottom (covers the plastic tank ring): sides 1/4" oak & face 1/8" oak I used a biscuit cutter (2 biscuits for each connection) and lots of Elmer's glue (no screws or nails). The stand is rock solid! As you can see I did bother to use any trim wood on the back. Link to comment
afiser Posted March 18, 2005 Share Posted March 18, 2005 why is there a hole in the back Link to comment
MattGecko Posted March 18, 2005 Author Share Posted March 18, 2005 Cords, tubing, power supplies and ballast pass through there. Link to comment
nanojake Posted March 19, 2005 Share Posted March 19, 2005 Thank you, Matt. I think I'm going to give it a shot. Is that a 12 gallon cube? This will also allow me to get another power tool (biscuit cutter). I'll tell my wife it's one of those win-win things. I get a new stand. She can make some biscuits. Link to comment
MattGecko Posted March 20, 2005 Author Share Posted March 20, 2005 LOL, yes its 12g Nanocube. You will also need a 1 3/8" Forstner bit to drill the holes for the hidden hinges. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.