aaronfmd Posted April 7, 2005 Author Share Posted April 7, 2005 my hinge screw was rusting. have since replaced it. Link to comment
BigE22 Posted June 9, 2005 Share Posted June 9, 2005 Hey aaron, were you able to place that pump on the floor of does it have to be placed higher? Will it pump up about 4 feet? Link to comment
aaronfmd Posted June 10, 2005 Author Share Posted June 10, 2005 I think 4 feet would be a stretch. I think mine is about 2.5. the height of the tank plus maybe 6-9 inches or so. marine depot (in the link at the beginning that I put in) says it will pump 30 inches. You might be able to push it a little, but i would recommend a shelf of some type. good luck! Link to comment
JAMAICANreef Posted June 16, 2005 Share Posted June 16, 2005 I have two old phone adaptors.... 1. 120V-9V 2. 12oV-3.7V Will any of these work? i cant seem to find one that is 120 to 12..thanks Link to comment
aaronfmd Posted June 16, 2005 Author Share Posted June 16, 2005 i'm not sure what you want to use the adaptors for. all you need is an extension cord and the pump. no other power supply is needed. Link to comment
JAMAICANreef Posted June 17, 2005 Share Posted June 17, 2005 ummmm...the adaptor is to power the float valve...have you read the rest of this thread? Are you aware of the fire hazard? thanks...can the people with the "relay and 12v adaptor" diagram please answer my question...thanks! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.