Pili4444 Posted November 28, 2004 Share Posted November 28, 2004 Ok, so I am going to set up a 20L but I dont know which way i should set up the overflow. A HOB box is probebly the easiest but it takes up a lot of space in the tank. I am also thinking about drilling but i dont know how i would plumb it. (BTW, what is a durso?) Thanks Link to comment
nalbar Posted November 28, 2004 Share Posted November 28, 2004 http://www.aurx.net/saltwater/durso.html a durso is a method to raise the level of water in an overflow box to make it quieter because the water does not fall into the box as far. in other words, it removes the water fall. nalbar Link to comment
nalbar Posted November 28, 2004 Share Posted November 28, 2004 there is a picture of my overflow in this thread; http://www.nano-reef.com/forums/showthread...20&pagenumber=2 my type takes up much less room than a box, however they are noisier than a box with a durso. nalbar Link to comment
EtOH_is_good Posted November 29, 2004 Share Posted November 29, 2004 this is the durso site. i'm just setting up an overflow box with either a durso or stockman standpipe. the stockman seems a bit easier and more compact, so it'll fit the box better. also try reading this nr article on plumbing. Link to comment
Pili4444 Posted November 30, 2004 Author Share Posted November 30, 2004 Thanks for all the good info! I think i am going to do it the way kappa did on his 15 gallon. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.