jennmac415 Posted April 10, 2022 Share Posted April 10, 2022 I bought a used 32 gallon biocube yesterday, it's in great shape, but the guy was running the inline UV, and I'm not wanting to run that right now while I'm starting it up. Problem is, it seems to be missing the original elbow that came with the tank that enables you to connect the one end to 1/2 id tubing and the other end to the return. The elbow for the uv is the same size on both ends so won't fit the 1/2 id tubing. Any idea where I can find one of the original elbow? I've looked on Coralife and other online places, no luck. Thanks! Quote Link to comment
Pjanssen Posted April 10, 2022 Share Posted April 10, 2022 home depot. sprinkler department Quote Link to comment
jennmac415 Posted April 11, 2022 Author Share Posted April 11, 2022 Thanks for your reply. I actually thought about going there late this afternoon, but didn't make it there. Will try one day this week. 1 Quote Link to comment
DSA65PRO Posted April 17, 2022 Share Posted April 17, 2022 The Elbow should be on the UV, that’s where mine was. Had to pour very hot water on the elbow to remove it. I’m not using the pump that came with it. A 3/8 90 Degree, Thread X Barb fitting, the inside of the treaded fitting “socket,” is pushed over the piece that goes thru the back wall. It’s a tight fit, with no glue. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.