Jump to content
ReefCleaners.org

Sump layout


Willzs

Recommended Posts

So this is my current sump layout from left to right:

 

RO chamber

Inlet/filter sock/skimmer

Seachem matrix/LR rubble

Heater/return pump

 

The problems I have are a lack of space in the sump to carry out any maintenance of it, detritus build up and a continuous pain of switching out filter socks.

 

What would you recommend to help solve these issues? I was thinking about taking out the baffle between the inlet and matrix chamber but not sure this would help?

 

Thanks

20210321_102157.jpg

Link to comment

Consider switching to a 30 or 40 Breeder – something without baffles.

 

Consider whether you want the integrated ATO reservoir.  I'm sure it works well, but it also seems like a portble/removale option would be of higher utility.

 

You could end up with nothing down there other than the skimmer, ATO sensor, a small heater (you also have one in the display, ideally), the return pump and a circulation pump to prevent detritus from settling.  

 

A filter sock is not a requirement, per se, but you will probably need some type of inlet to contain bubbles and salt spray.  There are lots of designs out there...or DIY your own.

 

...or use a mesh sock if you want to keep the sock but have less maintenance.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recommended Discussions

×
×
  • Create New...