Jump to content
inTank Media Baskets

Greg's Reefing Saga ( photo dump )


ReefGoat

Recommended Posts

2 hours ago, ReefGoat said:

But I'm almost positive ill be able to hang it high enough over the tank to get the par ratings I need

8 x 24" w/ 2 LED strips

 

Are you sure You're almost positive?

1 hour ago, Reefkid88 said:

I personally feel like it will be fine. I can't blame you,it was a killer deal on a phenomenal set up. 

It was

 

 

Link to comment
9 minutes ago, Reefkid88 said:

Well F me in the A I honestly thought it was a 6 bulb 😂😂😂 okay yeah definitelty a little over kill hahaha I stand corrected. 

I read some reviews and at 8" below fixture it was putting out around 400 par for the 24w. When it gets to the higher wattage fixtures the par can shoot up pretty high. I figure at hanging 12 to 14 inches above waterline. I should be good. 

  • Like 1
Link to comment

I now harness the power of the sun. Next haul is the rest of the equipment. I'm still undecided on return pump, heater and powerheads. I've bounced around on so many options. That im not even going to think about it again until the day I go to order. 

20201124_111450.jpg

  • Like 3
Link to comment
1 hour ago, ReefGoat said:

I now harness the power of the sun. Next haul is the rest of the equipment. I'm still undecided on return pump, heater and powerheads. I've bounced around on so many options. That im not even going to think about it again until the day I go to order. 

20201124_111450.jpg

what a tease, who cares about the wrapping....😒

 

let's see inside

  • Haha 1
Link to comment
29 minutes ago, mitten_reef said:

what a tease, who cares about the wrapping....😒

 

let's see inside

I will when I get home. Still at work lol its in my back seat. 

  • Haha 2
Link to comment

Ok so we will have to wait a little bit. Ill probably work on the issue on Friday. Upon further inspection fedex must've totally disrespected the package because the reefbrite xho strips had been bent off the fixture. It like pulled the screws out of the housing. The box wasn't too beat up. So it must've just been from them handling it ruff and the weight of it the fixture just bent them right off. THE GOOD NEWS. Is that I have a plan!!! I've already bent the brackets back into shape and all I have to do is hull out screw holes for a slightly bigger fastener. No big deal at all. But I can tell you this. These things are bright!!!! 

20201124_180617.jpg

20201124_180607.jpg

20201124_180522.jpg

20201124_175920.jpg

20201124_175842.jpg

  • Like 1
  • Wow 2
Link to comment
12 minutes ago, ReefGoat said:

Boss let me off early today. So bam!! She's all fixed up now. Love this thing.

20201125_143239.jpg

yup, not too much at all for a 12" wide tank.....

 

you can probably put an indoor garden on the floor next to the tank 🤣

  • Haha 1
Link to comment

I honestly don't even think the leds will even serve a purpose on the light lol they will probably not even spill one bit of light in there seeming its 5.5" wider than your tank 😂

 

 At least spread and shadowing won't be an issue !!! 

Link to comment
17 minutes ago, mitten_reef said:

yup, not too much at all for a 12" wide tank.....

 

you can probably put an indoor garden on the floor next to the tank 🤣

Can't grow pot in Louisiana yet lol. 

  • Haha 1
Link to comment
16 minutes ago, Reefkid88 said:

I honestly don't even think the leds will even serve a purpose on the light lol they will probably not even spill one bit of light in there seeming its 5.5" wider than your tank 😂

 

 At least spread and shadowing won't be an issue !!! 

I'm worse than canned with his 4 primes on a IM10. I think he's up to 4 now....might be 3. 

  • Haha 2
Link to comment
  • 2 weeks later...
On 11/25/2020 at 3:44 PM, ReefGoat said:

Boss let me off early today. So bam!! She's all fixed up now. Love this thing.

20201125_143239.jpg

this is some powerful light. you'll have really good spread and PAR reading. good enough to grow some sps one day! 

  • Thanks 1
Link to comment
19 minutes ago, Reefkid88 said:

@farkwar

 If angled enough yeah,if not only the flooring will get hit lol. Hooefully they are usable though. More than likely they are,we shall find out. 

Contractors are starting on my roof next week. The giant hole from the pictures is already closed up and fixed. We have the insurance money so hopefully it won't take until may. 

Link to comment
  • 1 year later...
  • 1 year later...
On 2/3/2022 at 10:37 AM, Daveg99 said:

Too bad this thread died.    

The thread died. 

 

But the tank. She's a living. My house ended up not getting rebuilt for about another 2.5 years after that last post. I have since finished this tank and it's currently about 3 months since setup. I had setup a little Eshoppes Deskmate and had some Aussie live rock that I had purchased from Unique Corals that was about 6 months setup. I transferred that rock and a new package from TBS and this tank was born. It actually ended up being quite different from the original plan (imagine that). 

 

One big thing being that I didn't use the T5's. I decided to save those for a LARGER build if I continue to be successful with this tank. The tank i'm looking at for the future is the IM112 Lagoon. But that's not even in my vision right now. The T5's are in the closet put up safe. 

  • Like 2
Link to comment
  • ReefGoat changed the title to Greg's Reefing Saga ( photo dump )

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recommended Discussions

×
×
  • Create New...