Jump to content
rsucre

Nanobox Duo: white LEDs always on even at 0%

Recommended Posts

rsucre

Hi.  I have an issue with my old Nanobox Duo.  Today, the white LEDs are staying on, even at 0%.  They dim, but do not completely turn off.  This happens only on the left puck.  Can you help me troubleshoot the problem?  Perhaps there is a short circuit somewhere in the left puck (solder points)?  My guess is that the issue is at the puck or lamp (and not the driver/controller box) since it is happening just to a single puck.

 

Your help is appreciated.

 

Unknown.png.668522dd90ad06831638ee160d20a965.png        Unknown-1.png.8e3fe98fcde045504ac0567e259d0d1c.png

Share this post


Link to post
Justind823

You should email him to get a faster response. He's not on here as much as he used to be --

david@nanoboxreef.com

Share this post


Link to post
rsucre

Thanks for your reply @Justind823

 

I unassembled the light and tinkered a little bit with it.  The problem went away after I unscrewed one of the screws that attaches the puck to the enclosure.  I put the screw back in place and everything is all right now.  Weird...  I guess there was some kind of short circuit or stray voltage due to salt creep or something, but nothing visible.

 

Any ideas?

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recommended Discussions

×
×
  • Create New...