Jump to content
Frag Factory

What should I be dosing?

Recommended Posts

Frag Factory

Hey all,

 

So as my tanks grown in and I've added some calcium heavy livestock (a clam and some SPS) I'm at the point where I need to dose. I normally do this through my ATO with aquaforest Kh buffer and manually top up Ca and Mg... but because it's summer in England some days I need to run a fan and some days I don't. Evaporation and therefore daily dosing amount is very varied and my Alk is spiking +/-1.5dkh which is making my SPS look stressed.

 

So, I bought myself a Coral Box WF-01. It's just a small wifi controlled single head doser, it looks pretty neat.

 

My tank consumes the following over a week:

Alk - 3dkh

Ca - 20-30ppm

 

However, the plan was to dose Kalkwasser, but now I have the unit here I'm wondering if I should be ordering another and dose using the balling method. I already have the aquaforest kh buffer/calcium/magnesium salts. Or even dosing the 20-30ppm of calcium in ATO water and dosing Kh with the dosing pump.

 

According to online calculators I need 430ml of kalk a week which would be simple enough to dose, with balling I need 35ml of this and 10ml of that. Much smaller amounts, which makes me concerned that I'm (as a dosing noob) going to get something wrong and make things worse.

 

So, which would you do?

 

Stick to the original plan, dose Kalk (brightwell kalk++ which has magnesium too), or go with the more popular/common "balling" method?

 

Is there any real advantage/disadvantage to either?

 

Thanks

Share this post


Link to post
Frag Factory

Ok I'm going to go with kalkwasser and stick to the plan, dose all 3 major elements at once. If it goes wrong I can revert to my aquaforest salts.

Share this post


Link to post
xM3THODx

I like your thinking...I dose both Kalk and 2 part(Balling Method). It's been something Ive worked on in my previous nano and perfected in my new 20gal system. It can be a challenge keeping it all stable for nano, specifically sps dominated, but my setup has worked without a hitch since it was implemented.

 

I can go into full detail but it seems like you have an idea of what to do.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recommended Discussions

×
×
  • Create New...