Jump to content
fissues

20 // UNS // SPS

Recommended Posts

fissues
24 minutes ago, ninjamyst said:

My pink lemonade hasn't grown much in like 6 months.  Sigh.  But I think I know what I need to change to make my SPS color up and grow better.  MOAR FLOW AND LIGHT.  

The pink lemonade I mentioned put a base out that grew over the edge of the 2" disk and then proceeded to stall for 9 to 12 months, as I recall... then it exploded in growth after that.

 

Yeah, it's pretty surprising how much flow and light SPS need to get those really light pastel colors... But don't rule feeding out. Some of the best pieces I've seen were being fed phytoplankton, liquid oyster, and cyclops several times a week.  To counter all the extra nutrients we didn't even use any skimmers... We just built a massive algae scrubber... which also is an addition I'll be making the future. 

  • Like 1

Share this post


Link to post
MrFish888

Looks awesome. I’m starting my first tank. 

Share this post


Link to post
ninjamyst
29 minutes ago, fissues said:

The pink lemonade I mentioned put a base out that grew over the edge of the 2" disk and then proceeded to stall for 9 to 12 months, as I recall... then it exploded in growth after that.

 

Yeah, it's pretty surprising how much flow and light SPS need to get those really light pastel colors... But don't rule feeding out. Some of the best pieces I've seen were being fed phytoplankton, liquid oyster, and cyclops several times a week.  To counter all the extra nutrients we didn't even use any skimmers... We just built a massive algae scrubber... which also is an addition I'll be making the future. 

The guy recommended oyster feast to me too =).  I been running my kessil at 75% only and 15in above water line.  I lowered it and bumped it to 80% and will continue to ramp it up.  And I was only peaking at 75% for an hour.  Hahah.  Definitely not enough.  

Share this post


Link to post
fissues
4 hours ago, MrFish888 said:

Looks awesome. I’m starting my first tank. 

Thanks man! Get a build thread up and start posting! 

 

4 hours ago, ninjamyst said:

The guy recommended oyster feast to me too =).  I been running my kessil at 75% only and 15in above water line.  I lowered it and bumped it to 80% and will continue to ramp it up.  And I was only peaking at 75% for an hour.  Hahah.  Definitely not enough.  

Have you tested PAR at all yet?  I would think at like 12" you should probably be able to get right around 100% safely. I usually just tell people to only raise intensity about 5% once every 7-14 days and just wait for the coral to show you is they like it. 

Share this post


Link to post
lizzyann

Really nice start, excited to see where this goes! I love your light mount. I was hoping to do an industrial-looking pipe mount for my two AI Primes when I upgraded my tank but I ended up going with a different, much simpler, plan because the pipe+lights+extending out 2ft just seemed too heavy to be supported by drywall. You've got me thinking again about how I could possibly make it work though!

  • Like 1

Share this post


Link to post
fissues

Back from the trip... Stoked to say everything worked awesome and the tank is doing great. It was so nice to be able to check up on the Apex and verify everything was working properly. 

 

20190807_180202.thumb.jpg.50a4a1283a10399e8dbe2a1e81da3ebc.jpg

 

I was also able to keep a close eye with this Foscam wifi camera... I chose it because it was the only one under $100 to have 4x optical zoom so I could get a little more detail if I needed. 

 

20190729_150227.thumb.jpg.fbe7204e68355ab54dd3d938b42421e6.jpg

 

You can probably see that the corals are all starting to lighten up a bit... 

 

_DSC0956.thumb.jpg.eade02d9118df5aea03e18ed81439572.jpg

 

I saw this beginning to happen just before I left, so I lowered the lighting intensity to ~30% at max for about 5 hours (down from 40%). I also tested for nitrates and was delighted to see that they're almost not even registering on my Tropic Marin test kit. 

 

_DSC0959.thumb.jpg.743add24187b2f1004a50199f90719a6.jpg

 

I'm definitely not trying to keep them that low, but this means the 8x8x4 Marinepure block is actually housing some denitrifying bacteria that's helping consume nitrates. So now I can start feeding some coral food regularly and I shouldn't have to worry so much about nitrate levels (though even if I do get too much nitrate, I have a plan for that as well).

 

I think I'm gonna go pick up some calanus and Oyster Feast and LRS Reef Frenzy and start feeding switching off with a little every day or so. That's been my favorite combination for years now. 

 

I also added a couple Scarlett hermits and Trochus snails to help with the new algae growth, but my older red leg hermits have already eaten a couple snails 😑 whatever though. 

 

Next up, more fish.

  • Like 2

Share this post


Link to post
Tigahboy

Beautiful beginnings.  Love the scape and overall clean look of the set-up.  Nicely done!

  • Like 2

Share this post


Link to post
fissues
On 8/4/2019 at 12:26 AM, lizzyann said:

Really nice start, excited to see where this goes! I love your light mount. I was hoping to do an industrial-looking pipe mount for my two AI Primes when I upgraded my tank but I ended up going with a different, much simpler, plan because the pipe+lights+extending out 2ft just seemed too heavy to be supported by drywall. You've got me thinking again about how I could possibly make it work though!

Thanks! You'd be surprised with how much weight drywall can hold. I have 4 of the 8 screws from my mounts reaching all the way into the wall and none of them hit studs. I just used 4 Pop Toggles to anchor the screws. I'm not even phased by the weight on the drywall now. I'm also the guy with a stand supporting a 20 gallon that only uses 1/2 plywood. (using 2x4s on tanks under 75 gallons is an insane amount of overkill.)

  • Like 1

Share this post


Link to post
ninjamyst

My fav hermit is scarlet red.  The rest are killers.  

  • Like 2

Share this post


Link to post
fissues
15 hours ago, Tigahboy said:

Beautiful beginnings.  Love the scape and overall clean look of the set-up.  Nicely done!

Thank you! 

14 hours ago, ninjamyst said:

My fav hermit is scarlet red.  The rest are killers.  

Yeah, I've known that's usually the case. I used to only recommend Scarletts working at the shop I was with for years, but I stubbornly thought I could probably get away with a couple red legs anyway, for biodiversity's sake... Dumb idea on my part lol. 

  • Haha 1

Share this post


Link to post
teenyreef

The tank is looking beautiful so far, and I love your build! How are things going? I have the same tank sitting in an the box waiting for me to figure out how to build a stand/desk for it, at which point I'm going to replace my desktop IM10. I'm still deciding on the return, though. I've been leaning towards drilling and using the Eshopps Nano overflow, but the lily pipes are such a clean look on a tank like this. Do you have to clean them often?

  • Like 1

Share this post


Link to post
fissues

Well, the end of summer hit me like a ton of bricks. I've had my hands full working on a bunch of photo/video projects, took a road trip across the country, my cover band has been getting ready for a packed season of shows, and my original band is about to start working on a new album. 

 

The tank is mostly good, aside from this... 

_DSC5337.thumb.jpg.fbb739073675801d12cd7734d1313299.jpg

 

Turns out I waited a few weeks too long to do a water change and encountered an ALK swing that hit this guy pretty hard. I've managed to save a branch and recovery looks promising. I'm about to clip off all the dead stuff, but I haven't had any cutters to safely do it, so I've been waiting for that package to get here. The pink lemonade and papaya acros didn't have nearly as hard a time. They basically just got a little brown with no tissue loss, and their colors are starting to bounce back already. 

 

I honestly didn't think there was any possible way my levels dipped THAT far from 3 small frags, but once I figured it out after that water change I started prepping for the next step of this setup. I got a couple dosers running with Brightwell A&B until my permanent method shows up from BRS. 

 

Here's what's goin on underneath the stand now... I figured I might as well plan my dosing out so it's as bulletproof and easy to adjust as possible. Any guesses on what I'm gonna be piping in from all these dosers? Lol 

20191008_140512.thumb.jpg.a81e59e3f8b480ed74650760a7a8fc27.jpg

 

This view is wth the CO2 scrubber moved out of the way so you can actually see what's behind it. It's kind of amazing how perfectly this stuff all fits in. Only about a quarter of an inch to spare on either side... Almost like I planned it lol. Though it's possible I may hang the scrubber in one of the upper corners (horizontally) so I can fit even more stuff in here. 😝

 

I've had everything stabilized for a week or so with tests  a couple time each day to confirm... And when the new stuff shows up I'll be able to make sure I'm putting every last thing I need into the water. 

 

Right now I've been testing at... 

Alk: 8.3dKH

Ca: 410ppm

Mg: 1320ppm

 

So with that taken care of I decided to pull the trigger on a few more pieces from the same guy I got the original 3 from. 

 

Ended up with a few bangers... 

_DSC5340.thumb.jpg.bbcf2626b10ae0980d1be9045bd11593.jpg

  • Like 1

Share this post


Link to post
fissues
On 9/29/2019 at 3:22 PM, teenyreef said:

The tank is looking beautiful so far, and I love your build! How are things going? I have the same tank sitting in an the box waiting for me to figure out how to build a stand/desk for it, at which point I'm going to replace my desktop IM10. I'm still deciding on the return, though. I've been leaning towards drilling and using the Eshopps Nano overflow, but the lily pipes are such a clean look on a tank like this. Do you have to clean them often?

Thanks! It's going ok, just a ridiculous time of year that led me to a dumb oversight I mention above^^^. Take a look at the beginning of this thread for the stand though. I literally did a plywood box with 1/2" Baltic Birch and it's holding up great! You could up all the sides to 3/4" for a bit more peace of mind but there's no need to start with 2x4s and sheath it with super thick plywood... just the 3/4" is PLENTY overbuilt. Trust me; you could park a car on it. Just be sure to use Baltic Birch and not the garbage you get from Home Depot/Menards/Lowes. Baltic birch has more better quality plies which are each thinner. Having the extra plies also gives more layers of glue per sheet and that greatly strengthens each full sheet of plywood.

 

As for the Mame overflow, I actually haven't cleaned mine yet... Partly because I'm lazy, but mostly because I'm slightly afraid of detaching it from the sump without breaking it. My solution is to redo the plumbing in few weeks so I can remove the overflow MUCH easier to clean it. I'm going to secure a section of hard plumbing inside the stand running out the back with a 90 and a union so instead of having to remove the drain/return tubing all the way down to the sump, I'll just have to unscrew union on the back of the stand so I can take off the overflow with only a foot or so of tubing and there won't be any sort of excess pressure on any of the glass pieces. Both the return and the drain line will have that same section installed. Meanwhile it actually hasn't gotten that dirty... any of the growth is fairly soft and sometimes comes dislodged when I turn the pump off and on again. There's really no coralline it.

 

As for the overflow, I was also considering the X Aqua In/Out and the Modular Marine overflow box (which both require drilling), but I really chose the Mame for aesthetics. Once I can clean it without having to worry about breaking it quite so much, then I'll be able to enjoy the look of it better lol.

  • Like 2

Share this post


Link to post
fissues

Screenshot_20191010-233358.thumb.png.78768f97453e91089ed3c105bb674e9f.png

 

I'm actually really surprised at how much I've been able to boost my pH lately. When I started the tank I was seeing 7.8 at the highest, which is why I opted for the CO2 scrubber. I wasn't sure it would work all that well or even if I'd like it, but I figured since I'm in an apartment (in a small old building) with questionable ventilation, I should do anything to make sure the tank has some fresh air getting to it. After I first installed it (with BRS media) I would see 8.3 at the end of the day for the first week and then after the first bit of media started getting exhausted I would get no higher than 8.15-8.2 for a couple months. I saw a friend have good success with Two Little Fishies CDX media and decided to give it a try. Since switching I've been hitting 8.35-8.45 every night for weeks on end, and it seems like I'm going through it s little slower. The CDX is definitely more expensive, but I'm pretty ok with the extra cost if it gets better results. 

 

20191010_235734.thumb.jpg.eab866c8e53ba0921f99d22aedd64365.jpg

  • Like 2

Share this post


Link to post
teenyreef

Thanks for the tips! That's definitely a good idea to have external unions so you can easily disconnect the Mame for cleaning. Also, that's crazy how much Ph improvement you are seeing from the scrubber. 

  • Like 1

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recommended Discussions

×
×
  • Create New...