ChristopherDido Posted July 15, 2019 Author Share Posted July 15, 2019 8 hours ago, Tempestas said: The tank's really filling in nicely. Thanks! I was thinking so too! Really need to more different colored hammers and a Duncan coral and I'll be happy, unfortunately haven't found any really good deals on them. I haven't paid more than $5 on a frag so far. I'm trying to do this as cheaply as possible, may have to bite the bullet and spend a few extra bucks to get what I want. 4 Quote Link to comment
This guy is extra salty Posted July 15, 2019 Share Posted July 15, 2019 On 7/13/2019 at 9:10 PM, Clown79 said: That's so cool. I'd love to be able to have the talent to do this kinda stuff! Wow. Love the etching on that lid. That is super cool You have to own a 60k laser cutter(or something similar) it’s relatively simple just a few clicks and paste 😂 photographs look pretty neat too here is one I did for my Ole lady for mother’s day sorry @ChristopherDido for taking over your thread. I’m going back to my corner now🤣 let me know if that lid is still bowing, I’ll make something a bit more substantial 💪 1 Quote Link to comment
Clown79 Posted July 15, 2019 Share Posted July 15, 2019 9 minutes ago, This guy is extra salty said: You have to own a 60k laser cutter(or something similar) it’s relatively simple just a few clicks and paste 😂 photographs look pretty neat too here is one I did for my Ole lady for mother’s day sorry @ChristopherDido for taking over your thread. I’m going back to my corner now🤣 let me know if that lid is still bowing, I’ll make something a bit more substantial 💪 Wow! That's is amazing. Ya definitely don't own one of those or a garage, wish I did, I constantly have ideas in my head but no way to make them. Lol 1 Quote Link to comment
ChristopherDido Posted July 15, 2019 Author Share Posted July 15, 2019 44 minutes ago, This guy is extra salty said: You have to own a 60k laser cutter(or something similar) it’s relatively simple just a few clicks and paste 😂 photographs look pretty neat too here is one I did for my Ole lady for mother’s day sorry @ChristopherDido for taking over your thread. I’m going back to my corner now🤣 let me know if that lid is still bowing, I’ll make something a bit more substantial 💪 Don't worry about it. Lid is bowing, I think because originally the light may have sat too close 🤷♀️. I may take you up on the more substantial thing though. Only the one with the solo Lorax though. I'm saving the other for when my little one gets a bit bigger and I can make him his own little tank for his room and put that lid on it. Quote Link to comment
This guy is extra salty Posted July 15, 2019 Share Posted July 15, 2019 25 minutes ago, ChristopherDido said: Don't worry about it. Lid is bowing, I think because originally the light may have sat too close 🤷♀️. I may take you up on the more substantial thing though. Only the one with the solo Lorax though. I'm saving the other for when my little one gets a bit bigger and I can make him his own little tank for his room and put that lid on it. It’s a combo of heat and the weight in the middle. (I’m having the same issue with mine) Quote Link to comment
ChristopherDido Posted July 15, 2019 Author Share Posted July 15, 2019 20 minutes ago, This guy is extra salty said: It’s a combo of heat and the weight in the middle. (I’m having the same issue with mine) That makes sense. I'm fine with mine for now, let me know if you figure out a fix and I'm down for purchasing a new one. Quote Link to comment
A.m.P Posted July 15, 2019 Share Posted July 15, 2019 Why not just reinforce it with an acrylic rod or two spanning the short-side? Would also help with aeration. Quote Link to comment
ChristopherDido Posted July 17, 2019 Author Share Posted July 17, 2019 On 7/15/2019 at 3:10 PM, Amphrites said: Why not just reinforce it with an acrylic rod or two spanning the short-side? Would also help with aeration. Not sure what that would look like. It's the idea to weigh down the sides? Quote Link to comment
ChristopherDido Posted July 18, 2019 Author Share Posted July 18, 2019 Alright new news on the coral front. Had to go get a recall taken care of on my car and they finished quicker than I thought. Nice part about this, the dealership was right across from an LFS I hadn't been to in a while, so naturally had to stop in. While there on their $10 rack I found a Duncan coral. It's small and not crazy colorful, but then again it may color up more after it's been in the tank awhile. But I like it and it's already opened up quite nice. I was afraid with it being directly under the HOB return "waterfall" that it would not be happy. But not the case. Here's a pic when first added: What it looks like 4 hours later (apparently it has to polyps/heads, can't see the second because it's behind): Majano update: RFA with Macro lens: And my tiny Zoa's, there's a second right behind this one: And lastly an FTS: 8 Quote Link to comment
Wingy Posted July 18, 2019 Share Posted July 18, 2019 Under the return might be to much for that duncan. Does it look less scrunched up and stiff today? Target feed that duncan some Reef Roids and see what it does. Mine swells all up and looks like its ready to burst. I swear it looks like it wants a burp and a belly rub. 1 1 Quote Link to comment
ChristopherDido Posted July 18, 2019 Author Share Posted July 18, 2019 1 hour ago, Wingy said: Under the return might be to much for that duncan. Does it look less scrunched up and stiff today? Target feed that duncan some Reef Roids and see what it does. Mine swells all up and looks like its ready to burst. I swear it looks like it wants a burp and a belly rub. Hmmm... It looks like it did in the store. Does it in the second pic, after it being in the tank for 4 hours, not look happy? I do not have any reef roids, but I do have some coral frenzy very small pellets I fed to my RFAs occasionally, would it eat those? 1 Quote Link to comment
Ratvan Posted July 18, 2019 Share Posted July 18, 2019 30 minutes ago, ChristopherDido said: Hmmm... It looks like it did in the store. Does it in the second pic, after it being in the tank for 4 hours, not look happy? I do not have any reef roids, but I do have some coral frenzy very small pellets I fed to my RFAs occasionally, would it eat those? It doesn't look unhappy to me, try feeding it the Coral Frenzy. I have an unhappy Duncan lol Mine takes 1.4-1.5mm pellets so might be worth a try. It seems to be easier to take if they're crushed and target fed Quote Link to comment
Wingy Posted July 18, 2019 Share Posted July 18, 2019 From what I have read and seen in my own tank they have long flowy tentacles in gentle flow and short thick tentacles more turbulent water. 1 Quote Link to comment
ChristopherDido Posted July 20, 2019 Author Share Posted July 20, 2019 On 7/18/2019 at 1:13 PM, Wingy said: From what I have read and seen in my own tank they have long flowy tentacles in gentle flow and short thick tentacles more turbulent water. Well mine definitely has short thick tentacles. Are yours doing ok in turbulent water? Anything I should watch for as a concern? If they're fine I'm gonna leave them there. 1 Quote Link to comment
Wingy Posted July 20, 2019 Share Posted July 20, 2019 Mine is about 3 inches to the right of the return and loves that spot. It came from a system with a lot of lateral flow and had its own clownfish friend. The closest I could come to duplicating that was off to the side a bit. You could try turning your pump off and see how it reacts. Here is mine Overhead view 1 Quote Link to comment
ChristopherDido Posted August 19, 2019 Author Share Posted August 19, 2019 Whoa been a hot minute since I gave an update. Here's where we're at. The Duncan is doing great, two beautiful heads on it! Majanos went for a little walk, there are two of them still. I got my macro eating turbo snail out of the tank and replaced it with a trochus, so my cuc is two I believe nerites and him. And I guess some might consider the pom pom one too, but he's special to me 🙂 Bad news the dino-farts are back 😞 they don't really seem to be stressing anything out 🤷♀️ just ugly. Here's a quick FTS. And two closeups. On 7/20/2019 at 8:17 AM, Wingy said: Mine is about 3 inches to the right of the return and loves that spot. It came from a system with a lot of lateral flow and had its own clownfish friend. The closest I could come to duplicating that was off to the side a bit. You could try turning your pump off and see how it reacts. Here is mine Overhead view My Duncan is happy, check my just posted post to see it opened up! 🙂 6 Quote Link to comment
Wingy Posted August 19, 2019 Share Posted August 19, 2019 That is a happy duncan. Glad to see it relaxed for you. 2 Quote Link to comment
A.m.P Posted August 19, 2019 Share Posted August 19, 2019 Everything looks happy in spite of the Dinos, you might be a magician and I hope it stays that way, I love how your tank looks like a bunch of shrubs and small trees. Something about low-lying scapes really works for me, thanks for the update. 2 Quote Link to comment
ChristopherDido Posted August 20, 2019 Author Share Posted August 20, 2019 12 hours ago, Wingy said: That is a happy duncan. Glad to see it relaxed for you. Thanks me too! Hoping to see it grow some heads! And hopefully not get over taken by the GSP 🤣 10 hours ago, Amphrites said: Everything looks happy in spite of the Dinos, you might be a magician and I hope it stays that way, I love how your tank looks like a bunch of shrubs and small trees. Something about low-lying scapes really works for me, thanks for the update. I really like it too, makes this tiny tank look much bigger! Still want to add one or two more hammers and if I find a super cheap Duncan get one more. 2 Quote Link to comment
Wingy Posted August 20, 2019 Share Posted August 20, 2019 Mine is close to taking up a third of the length of the tank. i don't dare get another without having a bigger tank first. 1 Quote Link to comment
ChristopherDido Posted August 20, 2019 Author Share Posted August 20, 2019 1 hour ago, Wingy said: Mine is close to taking up a third of the length of the tank. i don't dare get another without having a bigger tank first. If mine did that if be super happy 😛 Quote Link to comment
Ratvan Posted August 20, 2019 Share Posted August 20, 2019 Gorgeous and whimsical totally fits the theme. Great tank 2 Quote Link to comment
Christopher Marks Posted October 23, 2019 Share Posted October 23, 2019 Hiya @ChristopherDido! Can you believe it has been 7 months already?! 😮 We missed your September FTS update but you're still in the running! This is a friendly reminder to post your final competition FTS and a 1 to 2 paragraph recap of your experience in the pico reef competition. Be sure to share your future plans for your pico reef as well, will it continue forward or get an upgrade? The competition ends on Sunday October 27th at midnight! Thanks for joining in the fun with us! Quote Link to comment
ChristopherDido Posted October 29, 2019 Author Share Posted October 29, 2019 Hey all, Sorry wasn't able to keep up real well with this. We ended up moving in the middle of September. All of my corals and tank inhabitants of both of my tanks survived. Never got a chance to add much more. But here's a pic of it I just took before turning off the lights for the night. It's been fun and stressful doing a tank during a move lol. I assume I'm out of the contest, so good luck to everyone. If that's not the case let me know @Christopher Marks Thanks for the fun! If I'm still really in I'll post a cleaned up photo and 2 paragraph update on Friday or Saturday. 7 Quote Link to comment
Christopher Marks Posted November 2, 2019 Share Posted November 2, 2019 @ChristopherDido You are still in technically! Sorry I missed your message, feel free to post an new final update and I'll update your voting link and info. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.