This guy is extra salty Posted April 13, 2019 Author Share Posted April 13, 2019 It has been a wild week for me lack of sleep and been trying to work on things for this build but other stuff has taken precedence over anything else my ole lady gave birth(emergency csection) on Tuesday 4/9/2019 to a 9lb 11oz. Boy. Sorry I haven’t been replying to PM’s and other inquiries on the forum. But I’m getting into a swing of things now since they’re releasing the momma and baby tomorrow. I will reveal tank V2.501 tomorrow when I get the welds into place and my solution to my pump fitting. Also i have a stand brewing in the works too! 7 5 Quote Link to comment
asting Posted April 13, 2019 Share Posted April 13, 2019 2 minutes ago, This guy is extra salty said: It has been a wild week for me lack of sleep and been trying to work on things for this build but other stuff has taken precedence over anything else my ole lady gave birth(emergency csection) on Tuesday 4/9/2019 to a 9lb 11oz. Boy. Sorry I haven’t been replying to PM’s and other inquiries on the forum. But I’m getting into a swing of things now since they’re releasing the momma and baby tomorrow. I will reveal tank V2.501 tomorrow when I get the welds into place and my solution to my pump fitting. Also i have a stand brewing in the works too! Congrats! Looking forward to seeing the next tank you'll rebuild. Anyone on bets for how many stand versions? 1 Quote Link to comment
This guy is extra salty Posted April 13, 2019 Author Share Posted April 13, 2019 1 minute ago, asting said: Congrats! Looking forward to seeing the next tank you'll rebuild. Anyone on bets for how many stand versions? 🙏 thanks I already have it saw cut, and it will be marvelous! Lol well ole lady said it has to be modern otherwise it’s going in the laundry room. 🤦♂️ Quote Link to comment
asting Posted April 13, 2019 Share Posted April 13, 2019 side note, why are wives referred to as old ladies? I want my wife to be called a young, hot thing. 3 Quote Link to comment
Tigahboy Posted April 13, 2019 Share Posted April 13, 2019 24 minutes ago, This guy is extra salty said: It has been a wild week for me lack of sleep and been trying to work on things for this build but other stuff has taken precedence over anything else my ole lady gave birth(emergency csection) on Tuesday 4/9/2019 to a 9lb 11oz. Boy. Sorry I haven’t been replying to PM’s and other inquiries on the forum. But I’m getting into a swing of things now since they’re releasing the momma and baby tomorrow. I will reveal tank V2.501 tomorrow when I get the welds into place and my solution to my pump fitting. Also i have a stand brewing in the works too! Congrats!! Awesome news. 1 1 Quote Link to comment
This guy is extra salty Posted April 13, 2019 Author Share Posted April 13, 2019 30 minutes ago, asting said: side note, why are wives referred to as old ladies? I want my wife to be called a young, hot thing. It’s to throw off people you’re talking to, because no one wants a “mr steal yo girl” 4 Quote Link to comment
kimberbee Posted April 13, 2019 Share Posted April 13, 2019 48 minutes ago, This guy is extra salty said: my ole lady gave birth(emergency csection) on Tuesday 4/9/2019 to a 9lb 11oz. Boy. Congrats!! Hope they're both doing well! My c-section boy was 9lbs 15oz. Now, at just 6mo old, he's 23lbs and in size 18mo clothes. Enjoy your "little" baby, they grow up so fast!! 1 1 Quote Link to comment
MetaTank Posted April 13, 2019 Share Posted April 13, 2019 7 minutes ago, kimberbee said: Congrats!! Hope they're both doing well! My c-section boy was 9lbs 15oz. Now, at just 6mo old, he's 23lbs and in size 18mo clothes. Enjoy your "little" baby, they grow up so fast!! Yean, my little girl is 11 months, wearing 24 month stuff...lol I mean, can we get the baby industry to re-size things, please! 2 3 Quote Link to comment
seabass Posted April 13, 2019 Share Posted April 13, 2019 Wow, congrats! Good to hear that everyone is fine. 1 1 Quote Link to comment
asting Posted April 13, 2019 Share Posted April 13, 2019 20 minutes ago, seabass said: Wow, congrats! Good to hear that everyone is fine. Sounds like he is done cycling 1 1 Quote Link to comment
This guy is extra salty Posted April 13, 2019 Author Share Posted April 13, 2019 1 hour ago, Tigahboy said: Congrats!! Awesome news. Thank you 🙏 1 hour ago, MetaTank said: Congratulations! Thanks! 🙏 1 hour ago, kimberbee said: Congrats!! Hope they're both doing well! My c-section boy was 9lbs 15oz. Now, at just 6mo old, he's 23lbs and in size 18mo clothes. Enjoy your "little" baby, they grow up so fast!! Yep he’s a little Michelin man the 12mo onesie is a little snug on him. No newborn clothes here 😭 55 minutes ago, seabass said: Wow, congrats! Good to hear that everyone is fine. Thanks! 🙏 36 minutes ago, asting said: Sounds like he is done cycling He was done last week 😂 3 Quote Link to comment
yoshii Posted April 13, 2019 Share Posted April 13, 2019 Wow congratulations! Glad baby and mom are both doing well. That's a big baby lol! I was a premie at a little over 2lbs 1 5 Quote Link to comment
ChristopherDido Posted April 13, 2019 Share Posted April 13, 2019 Congrats! Enjoy the early stages. Our little bit is just over 7 months and crawling everywhere. Good luck catching up on sleep 🙂 2 1 Quote Link to comment
Tempestas Posted April 13, 2019 Share Posted April 13, 2019 18 hours ago, This guy is extra salty said: It has been a wild week for me lack of sleep and been trying to work on things for this build but other stuff has taken precedence over anything else my ole lady gave birth(emergency csection) on Tuesday 4/9/2019 to a 9lb 11oz. Boy. Sorry I haven’t been replying to PM’s and other inquiries on the forum. But I’m getting into a swing of things now since they’re releasing the momma and baby tomorrow. Congratulations on the birth of your son! 1 1 Quote Link to comment
A Little Blue Posted April 13, 2019 Share Posted April 13, 2019 18 hours ago, This guy is extra salty said: It has been a wild week for me lack of sleep and been trying to work on things for this build but other stuff has taken precedence over anything else my ole lady gave birth(emergency csection) on Tuesday 4/9/2019 to a 9lb 11oz. Boy. Sorry I haven’t been replying to PM’s and other inquiries on the forum. But I’m getting into a swing of things now since they’re releasing the momma and baby tomorrow. I will reveal tank V2.501 tomorrow when I get the welds into place and my solution to my pump fitting. Also i have a stand brewing in the works too! Congrats!!!! Healthy baby, happy wife, happy life. 🥳👼🍺 3 Quote Link to comment
This guy is extra salty Posted April 14, 2019 Author Share Posted April 14, 2019 14 hours ago, ChristopherDido said: Congrats! Enjoy the early stages. Our little bit is just over 7 months and crawling everywhere. Good luck catching up on sleep 🙂 Sleep? I haven’t had any good sleep since I was in an accident two years ago 😅 now I have a lot more naps lmao 🤣 6 hours ago, Tempestas said: Congratulations on the birth of your son! Thank you 🙏 I know I have a mini reefer on my hands now 6 hours ago, A Little Blue said: Congrats!!!! Healthy baby, happy wife, happy life. 🥳👼🍺 Thanks! 🙏 well she’s sorta happy but hurting cause she doesn’t have the potent medicine anymore lol 1 Quote Link to comment
debbeach13 Posted April 15, 2019 Share Posted April 15, 2019 Congratulations to you and your wife on the birth of your son. Is he your first? 1 Quote Link to comment
This guy is extra salty Posted April 15, 2019 Author Share Posted April 15, 2019 1 hour ago, debbeach13 said: Congratulations to you and your wife on the birth of your son. Is he your first? Thank you 🙏 Yes he is our first. This build will probably be his “nite lite” 😂 (ole lady shakes her head no) 1 4 Quote Link to comment
This guy is extra salty Posted April 16, 2019 Author Share Posted April 16, 2019 Aquascape been broken/drilled it’s ready to rock and roll. 🎸 it has been sitting in my sump for about a year, I’ll probably lose the beneficial Bacteria while the acrylic weld is curing.. unless.. I was thinking of making rock inserts(with acrylic) that will allow me to slide and change the aquascape to different positions.. thoughts anyone? Quote Link to comment
asting Posted April 16, 2019 Share Posted April 16, 2019 niice. so shamelessly, did you replace v2? I was second in line if you are disposing 🙂 i could talk my FIL into sw aquariums. PM me a price and i'd pick it up. 1 Quote Link to comment
This guy is extra salty Posted April 16, 2019 Author Share Posted April 16, 2019 23 minutes ago, asting said: niice. so shamelessly, did you replace v2? I was second in line if you are disposing 🙂 i could talk my FIL into sw aquariums. PM me a price and i'd pick it up. Yes I’m going to be getting rid of it i dislike the crazing, forgetfulness got the best of me. Especially the week prior to my son coming into this world.. you live in Saint Louis? Quote Link to comment
asting Posted April 16, 2019 Share Posted April 16, 2019 7 hours ago, This guy is extra salty said: Yes I’m going to be getting rid of it i dislike the crazing, forgetfulness got the best of me. Especially the week prior to my son coming into this world.. you live in Saint Louis? Haha understandable. I'm not but would gladly pay shipping to 44123/price you're asking. Understand entirely if you'd rather find someone local. Quote Link to comment
seabass Posted April 16, 2019 Share Posted April 16, 2019 8 hours ago, This guy is extra salty said: I’ll probably lose the beneficial Bacteria while the acrylic weld is curing Nitrifying bacteria will survive for months without an ammonia source. 8 hours ago, This guy is extra salty said: I was thinking of making rock inserts(with acrylic) that will allow me to slide and change the aquascape to different positions. A slide puzzle aquascape? That would be something. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.