DRGN Posted March 14, 2019 Share Posted March 14, 2019 I had a bit of a go last night placing my caribsea life rock. I'm either going to keep soft only or soft and LPS. What are your thoughts on any of these? 1 Quote Link to comment
paulsz Posted March 14, 2019 Share Posted March 14, 2019 To be honest, all three look good to me. But if I had to pick, it'd be option 2. Just make sure there's enough room on the sides for you to scrape the algae off (whether by hand or with a magnetic glass cleaner) What kind of light are you using? Quote Link to comment
Scotty Amen Posted March 14, 2019 Share Posted March 14, 2019 39 minutes ago, paulsz said: What kind of light are you using? Kinda looks like he's got the stock light on a Evo 13.5? I like the first one. Quote Link to comment
DRGN Posted March 14, 2019 Author Share Posted March 14, 2019 Thanks for the replies so far. It's funny, I was swaying towards option 3 but you both prefer the other 2. Yes I will be using the stock Evo lighting and hood. Those 3 attempts have room for algae scraping. I've got a magnet and handle type scraper. Quote Link to comment
NuisanceAlgaeCultivator Posted March 14, 2019 Share Posted March 14, 2019 I kind of liked 3 also, then 1, then 2. Quote Link to comment
Clown79 Posted March 14, 2019 Share Posted March 14, 2019 I like 1 and 3. Gives you height and depth. The second one is nice but the corals will all be at the same level. Quote Link to comment
Aquatic Spendthrift Posted March 14, 2019 Share Posted March 14, 2019 I like 2. if you want a difference in height for 2 take the rock in the front and split it in half so it is lower than the rest Quote Link to comment
East1 Posted March 14, 2019 Share Posted March 14, 2019 Option 3 looks best right now, but if you put any corals that extend upwards (anything that doesn't form a mat essentially) it'll throw off the shape and it'll look too crowded. I think the same for option 1 I would use a hybrid of option 2 and 3, but use the smallest rock to create a 'dam' to create a discrete higher sand level to the back, so you have one large rock at a lower level with a sand bed of 1" and then one large rock at the higher level with the sand banked up and retained by the small rock, at a height of 3". This, when filled in with corals as I imagine you'll stock it - leathers, zoas and torch corals or similar, will give the right height profile even if it looks sparse pre-stocking, and the sandbed variance will create a left to right movement that creates depth, kinda like the background of the Mona Lisa does. an example of what I mean is here, the rock is partially submerged in sand to retain the sand from eventually forming a uniform flatness. 1 Quote Link to comment
Friendly Posted March 14, 2019 Share Posted March 14, 2019 what do you plan to keep in there for fish or invertebrate livestock? the first one with the arch gives fish something to investigate and swim through. Quote Link to comment
DRGN Posted March 14, 2019 Author Share Posted March 14, 2019 1 hour ago, Friendly said: what do you plan to keep in there for fish or invertebrate livestock? the first one with the arch gives fish something to investigate and swim through. No idea yet, I've been so busy sorting equipment and haven't actually looked into fish or inverts. 2 hours ago, East1 said: Option 3 looks best right now, but if you put any corals that extend upwards (anything that doesn't form a mat essentially) it'll throw off the shape and it'll look too crowded. I think the same for option 1 I would use a hybrid of option 2 and 3, but use the smallest rock to create a 'dam' to create a discrete higher sand level to the back, so you have one large rock at a lower level with a sand bed of 1" and then one large rock at the higher level with the sand banked up and retained by the small rock, at a height of 3". This, when filled in with corals as I imagine you'll stock it - leathers, zoas and torch corals or similar, will give the right height profile even if it looks sparse pre-stocking, and the sandbed variance will create a left to right movement that creates depth, kinda like the background of the Mona Lisa does. an example of what I mean is here, the rock is partially submerged in sand to retain the sand from eventually forming a uniform flatness. I like this idea, I'll mock it up and see. Quote Link to comment
DRGN Posted March 14, 2019 Author Share Posted March 14, 2019 I do have more life rock than this as I bought the 20lb box hoping for more options but it was just made up of BIG pieces. I'm wondering if I should break it all up to give more choice.... Not sure how well this stuff breaks though. Quote Link to comment
paulsz Posted March 14, 2019 Share Posted March 14, 2019 will the fluval evo stock light be enough for soft corals and LPS? Quote Link to comment
DRGN Posted March 14, 2019 Author Share Posted March 14, 2019 16 minutes ago, paulsz said: will the fluval evo stock light be enough for soft corals and LPS? Other people seem to be managing fine with them under it. Quote Link to comment
Friendly Posted March 14, 2019 Share Posted March 14, 2019 1 hour ago, paulsz said: will the fluval evo stock light be enough for soft corals and LPS? they're good for softies, but that's about it. the light is not very good and they die/fault often. good and inexpensive alternatives are the ABI Tuna Blue 12w or 23w off of Amazon, or look at Coral Compulsions lamps, as they toss in a few more colors. Quote Link to comment
DRGN Posted March 14, 2019 Author Share Posted March 14, 2019 11 minutes ago, Friendly said: they're good for softies, but that's about it. the light is not very good and they die/fault often. good and inexpensive alternatives are the ABI Tuna Blue 12w or 23w off of Amazon, or look at Coral Compulsions lamps, as they toss in a few more colors. I'm surprised by what you've said. I've been looking at the evo for a while now and only came across one person who had to replace their light due to failure and as for keeping LPS: 1 Quote Link to comment
DRGN Posted March 15, 2019 Author Share Posted March 15, 2019 I decided to take my stone chisel to the rocks to see if I could split them into more choice but they really didn't like that. Despite my best efforts the bits broke off into rubble. I've ended up with just another variation of option 2. I'm thinking I might raise the right hand rock up in the same position to add a bit of height. I could do this with some egg crate. I'm struggling to make any of the other rock work, big rocks + small tank don't mix very well. Hey, if I ever upgrade at least I have the rock already 😉 1 Quote Link to comment
paulsz Posted March 15, 2019 Share Posted March 15, 2019 16 hours ago, DRGN said: Other people seem to be managing fine with them under it. oh wow good to hear! i was always given the impression that AIO tanks had bad lights. I'm planning on getting the 13.5G one in the future. Good to know it's got sufficient lights for softies/LPS Quote Link to comment
Firefish15 Posted March 15, 2019 Share Posted March 15, 2019 11 hours ago, DRGN said: I decided to take my stone chisel to the rocks to see if I could split them into more choice but they really didn't like that. Despite my best efforts the bits broke off into rubble. I've ended up with just another variation of option 2. I'm thinking I might raise the right hand rock up in the same position to add a bit of height. I could do this with some egg crate. I'm struggling to make any of the other rock work, big rocks + small tank don't mix very well. Hey, if I ever upgrade at least I have the rock already 😉 You could use 3 or 4 rubble pieces to lift up the right-hand piece some. That would give you a little more variation. I liked 3, personally, but this one looks good too. 1 Quote Link to comment
Dutchymomo Posted March 15, 2019 Share Posted March 15, 2019 You could try just one rock at a somewhat vertical angle and have some negative space in the tank. if you like that kind of thing Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.