Jump to content
Darquarium

Sump set-up under an already existing tank

Recommended Posts

Darquarium

Hey guys I’m new to this community, first time posting. First off I would like to thank a lot of you for all the great information I get out of here, such a great site and crowd here. 🙏

 

I’ve been running a 73 or 75 gallon(not sure exactly) bow front reef for about 7 years now. Currently for filtration I have a marine land canister c-360, I’m sure you are all familiar with these lol. For obvious reason I would like to install a sump system but I have a huge problem of where to put it as I cannot move my tank... does any one know if there are any sump systems that fit in the 73 gallon tank stands? Or any ideas on how to move the tank or maybe just what to do in general?! Any info helps thanks everyone!

Share this post


Link to post
mcs

Im sure you can find a sump or get one built to fit in the stand no problem.

Share this post


Link to post
Darquarium
14 hours ago, mcs said:

Im sure you can find a sump or get one built to fit in the stand no problem.

What size would you recommend for 75 gallons?

Share this post


Link to post
mcs

Generally just go as big as you can fit, the more water you have in the system the better. Plus more room for additions if you want bigger skimmer etc.

  • Thanks 1

Share this post


Link to post
specore
5 hours ago, Darquarium said:

What size would you recommend for 75 gallons?

Main thing is being sure it is large enough for the equipment you want and has enough extra capacity to handle any backflow when the pump is off. Other than that largest you can fit is a good rule 🙂

 

 

  • Thanks 1

Share this post


Link to post
Beer

If I recall correctly, its actually a 72 gallon tank.

I had one that I was going to set up as my first tank (mine came with a canister filter as well). I designed everything out and decided I needed get out of that living situation, so it never got set up.

 

If you have the stock bowfront stand, it will be pretty difficult to get a standard solution under there. It was so long ago now that I don’t recall the dimensions or what tanks will fit under there, but I do recall that options were pretty small due to the center brace and the curvature of the stand. You may need to go with a custom built sump to get a sufficient volume that can be placed inside the stand without draining the tank and moving things around. You may be able to get away with pulling panels from one of the sides and sliding the sump in that way, but I am not sure how stable that will be.

 

I recal seeing someone brace the stand, drain their tank half way down, slide the sump in from the front, then put the stand back together and refill the tank. Seemed a bit risky to me, but I think they had a lot of experience bracing houses when putting in larger headers for bigger windows and doors.

 

is the tank drilled?

Is it set up with overflows?

 

Another option may be to run the canister filter as a closed loop sump. Doesn’t allow you to run an in sump skimmer, but it gives you some options and doesn’t add cost.

 

Look into the 5 gallon bucket sump in the DIY section. I’ve got parts coming in to build something similar. Even working out how to add a light so I can run it as a ‘fuge with some macro.

Share this post


Link to post
mcarroll

@Darquarium Consider a Tunze Reefpack 500 instead of a sump:

Spoiler
Reefpack 500

Reefpack 500

For seawater biotopes from 200 to 500 liters (53 to 132 USgal.). Power consumption only 31 W for a... mehr

0500.000
 
620.57 USD

 

Gives you skimmer, filter and ATO in a package about the same size as a drain box you'd have for a sump.  Magnetically mounts to the glass inside your tank, so it's very flexible.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recommended Discussions

×
×
  • Create New...