reefhound Posted September 2, 2018 Share Posted September 2, 2018 I’ve restarte the tank, so new thread. To make a long story short, I broke down a 20, and did some upgrades to my ADA60F here goes equipment ADA60F with AIO conversion Micro ATO DA Controller (heater)(cooling fan)(moonlight)(open) a-neutronics power bar MP-10QDW (to also run a second tank) batery backup 72 hours on pump Kessil A160 WE Kessil Controller cheap moonlight bar livestock 5 margarita snails that MOW thru anything! Amazing, hair algae, glass, rock, I leave the back uncleared.. they prefer rock first. They need a dead on temp setting, which I have. Never lost one. one Damsel.. AKA (blue fish, blue shark, fuker) he attacks the hair on my fingers. i recently cleared about everything in my tank.. here are bits and pieces I can find.. this was the ADA60F rescue tank. enjoy just getting the the light bar in.. the tank is look down and thru... I absolutely love every piece of equipment I have this was a TV Stand/cabinet.. heavy as hell (we have rocket launches here) AC infinity programmable fans notice the hole in the back by the battery backup?? The backup is mounted off the cabinet, air drawn over it cabinet maintains 71 degrees, the fans ramp up 3x kydex is wonderful stuff ok... some tank pics and coral tear down.. I took a lot to the pet store and am looking forward to a trade for a frag of a new... unnamed bounce bounces.. tank tear down get all corals and fish from my 20 to a new home... clear the ADA to Bounce! UP NEXT Quote Link to comment
reefhound Posted September 2, 2018 Author Share Posted September 2, 2018 My favorites rescued and fragged the clean/ clear out today... i kept the bridge fragged out of my saved favorites.. I’ve managed to get everything healthy and reproducing.. I kept the young And made room for these.... 1 Quote Link to comment
reefhound Posted September 2, 2018 Author Share Posted September 2, 2018 i have a baby Golden Dragon Bounce below is the only other pick I can find.. apparently 1 in 3 bounce.. mine has bounced 2 Quote Link to comment
reefhound Posted September 2, 2018 Author Share Posted September 2, 2018 A ReefKoi Filtered iPhone 8 pics.. be gentle 1 Quote Link to comment
reefhound Posted September 2, 2018 Author Share Posted September 2, 2018 the WildFire Rodactus is known to bounce heres an online pic mine looks suspect Quote Link to comment
reefhound Posted September 2, 2018 Author Share Posted September 2, 2018 This is the Dragon Lady Bounce.. they are actually orange under Antic. the MOM and 2 baby’s will be here next week Quote Link to comment
A Little Blue Posted September 2, 2018 Share Posted September 2, 2018 Nicely done. A question, can kydex be molded to shape with heat gun? If so, does it hold shape? Quote Link to comment
reefhound Posted September 2, 2018 Author Share Posted September 2, 2018 Yes and yes.. YouTube Kydex gun holster, knife sheath.. you will see the endless possibilities. ive used it for years, but also tank clips, brackets, mounting boards.. also, used it in the tank forever. It will offgass cianide gas, so... watch some vids.. I use a torch, but a heat gun with fine tip? Perfect! stable chemically when cooled.. offgass begins at the burning point Quote Link to comment
reefhound Posted September 2, 2018 Author Share Posted September 2, 2018 Also, it’s cheap as hell on eBay.. this was .6 I believe Quote Link to comment
Pjanssen Posted September 3, 2018 Share Posted September 3, 2018 21 hours ago, reefhound said: the WildFire Rodactus is known to bounce Ok, so what do you mean by "bounce"? I thought a bounce mushroom was just a particular species of mushroom. Quote Link to comment
A Little Blue Posted September 3, 2018 Share Posted September 3, 2018 4 hours ago, reefhound said: Yes and yes.. YouTube Kydex gun holster, knife sheath.. you will see the endless possibilities. ive used it for years, but also tank clips, brackets, mounting boards.. also, used it in the tank forever. It will offgass cianide gas, so... watch some vids.. I use a torch, but a heat gun with fine tip? Perfect! stable chemically when cooled.. offgass begins at the burning point Cool. I have a couple projects that I could use this material for. Thanks for heads up on chemical reaction to heat. I own professional heat gun so I am glad to hear that it can be used to mold it into shape that way. Quote Link to comment
reefhound Posted September 3, 2018 Author Share Posted September 3, 2018 A Rhodactus that has formed “bubbles” is a bounce, with the exception of the “Godzilla” Yuma, which some consider to also be a bounce mushroom. some like the WWC Bounce can sell for serious money, rarity has an appeal as well.. there are literally “none” available on the west coast.. everyone local is pretty excited. Also, trading with the LFS on a bounce that is yet to be named.. beautiful purple and neon green bubbles. i have one that I can wait to grow out.. the Golden Dragon Bounce.. it is smaller than a dime.. I look at it thru 7x Loups, and it’s going to be amazing looking.. supposedly 1 in 3 bounce.. this has bounced, and I’ll probably never find another one. there are some theory’s as to why they bounce.. I have a few, and I’ll keep them to myself for now, but we will see. Quote Link to comment
reefhound Posted September 3, 2018 Author Share Posted September 3, 2018 46 minutes ago, A Little Blue said: Cool. I have a couple projects that I could use this material for. Thanks for heads up on chemical reaction to heat. I own professional heat gun so I am glad to hear that it can be used to mold it into shape that way. You will love it.. order some different thicknesses... I score and snap with a knife.. bandsaws fine, sands fine. NO Bonding though.. nothing will bond to it Quote Link to comment
A Little Blue Posted September 3, 2018 Share Posted September 3, 2018 9 hours ago, reefhound said: You will love it.. order some different thicknesses... I score and snap with a knife.. bandsaws fine, sands fine. NO Bonding though.. nothing will bond to it When you say nothing will bond to it, does it include epoxy, super glue or two part adhesive? Quote Link to comment
reefhound Posted September 3, 2018 Author Share Posted September 3, 2018 1 hour ago, A Little Blue said: When you say nothing will bond to it, does it include epoxy, super glue or two part adhesive? Yep, all of the above.. it’s smoothe and flexible in the tank I’ve used acrylic or Teflon bolts 1 Quote Link to comment
reefhound Posted December 1, 2018 Author Share Posted December 1, 2018 Lady Dragon Bounce with a baby and 2 more... 5 total... Reefkoi split into 3 ordered a baby Juggernaut, Neptune bounce, and berserker. Quote Link to comment
reefhound Posted December 24, 2018 Author Share Posted December 24, 2018 Light bar build coming up.. Quote Link to comment
reefhound Posted December 24, 2018 Author Share Posted December 24, 2018 In the mean time... we have some new prospects.. this creature shows a ton of potential baby Juggernaut turning Got my hands on a Raunchy Red and an iPhone camera filter Lady Dragon Bounce and Dragon “pups” all pups have new homes.. but thanks.. will let you know reefkoi we we have a new line.. only a few released to tanks 🤫 Tropics Bounce pup.. here’s MOMMA Stay tuned... have an OG and a Sunkist on the way Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.