drbegalke Posted August 20, 2018 Share Posted August 20, 2018 I replaced the PH with a MJ 1200. Having trouble threading the power cord prong on the new pump thru the narrow opening between the Cubey tank and hood. I'm sure someone has the solution? Thanks in advance. Quote Link to comment
StevieT Posted August 21, 2018 Share Posted August 21, 2018 Razor blade, hot knife, Dremel? Cut the cord, use wire nuts or install a new plug system. Quote Link to comment
drbegalke Posted August 21, 2018 Author Share Posted August 21, 2018 I cut the cord to get the old pump out... But there has to be a way to put a new pump in without needing an electrician? Quote Link to comment
specore Posted August 21, 2018 Share Posted August 21, 2018 Does the hood not come off? Then you should be able to run the wire and put the hood back on. (at least on my old JBJ Nanocube the lid came off pretty easily) Quote Link to comment
drbegalke Posted August 21, 2018 Author Share Posted August 21, 2018 If it does, I am not sure how... Quote Link to comment
drbegalke Posted September 2, 2018 Author Share Posted September 2, 2018 No one has done this? Quote Link to comment
Xanthine Posted July 14, 2019 Share Posted July 14, 2019 I know this thread is old but it came up when I was searching for JBJ Cubey info. I got my 20g Cubey on deep clearance. And there's enough annoying things like this that I see why it's no longer sold most places, and why I have a hard time finding mods and other people who have one..... Anyways in case anyone else has this issue...here's what works, for the 20 at least. You have to wiggle and rotate the plug in one hand, while changing the angle of the hood with the other hand. Around 45 degrees seems to work best, but you really have to wiggle it. Normal plug - Jebao Plug - same thing Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.