3d printed Apex Break out Box.

[reefinnewb]

Decided I needed a breakout box for my Apex. I sourced some parts from Amazon and designed a box for it. 2 hours later, I have a BoB.

 

[Christopher Marks]

Very slick @reefinnewb! I love seeing 3D printing working its way into the hobby with awesome DIY projects like this! Give us a view of it all installed too once you have it in use. 🙂 

[reefinnewb]

Thanks Chris. I've found more uses for the printer for my reef tank than anything else. Here are the .STL files for this box

 

https://www.thingiverse.com/thing:2945642

 

Hope this is allowed. I also will be uploading a ton of other items.

[bozoreefer]

Hey!

 

Do you have a wiring diagram for this?

 

Thanks!

[reefinnewb]

Let me see if I can find one. It's been a while since I created this.

 

Red - Pin 1 - Input #1
Brown - Pin 2 - Input #2
Green - Pin 3 - Input #3
Yellow - Pin 4 - Input #4
Orange - Pin 5 - Input #5
Grey - Pin 6 - Input #6
Purple - not used
Blue - Pin 8 - Ground

 

All connections use a common ground.