Jump to content
dling

mp10 holding problem

Recommended Posts

dling

since I upgraded the size of my tank my mp10 will not stay in place due to the glass being thicker.

It keeps slowly sliding down the glass. I currently have something under it to stop it from sliding all the way

down to the bottom of the tank. Anyone else have this problem? Any suggestions that would make it stay in place ?

Share this post


Link to post
dling

I think I may have solved the problem. Did some reading about others having the same problem.

I cleaned the glass real good as well as both sides of the mp10. So far so good. Fingers X it holds.

Share this post


Link to post
Mazzy21

I've noticed that if you don't line things up just right between the two sides there is some vibration and movement. The pieces almost act like magnets flipped the wrong way, pushing away from each other. There is a thickness threshold listed for these, but if you don't believe you've met that with the thickness of your glass then I would try rotating the pieces just a little to see if you can find a sweet spot where they will hold to each other better.

Share this post


Link to post
dling

Thanks.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recommended Discussions

×
×
  • Create New...