Jump to content
xiaoxiy

ISO/WTB: MP10 NonQD Dryside and Wetside

Recommended Posts

xiaoxiy

Hi Nano Reefers,

 

Any reefers have an unused old nonQD MP10 dryside/wetside lying around?

One of my MP10's dryside pooped out last weekend and in the process of troubleshooting it, I broke my wetside as well. My driver box is still functional so I now in search of a replacemente dryside/wetside. I was originally going to order a replacement dryside online, but I can't seem to find any vendor that sells the non-QD drysides anymore.

-Xiaoxi

Share this post


Link to post
Exodus
On 12/14/2017 at 7:12 AM, xiaoxiy said:

Hi Nano Reefers,

 

Any reefers have an unused old nonQD MP10 dryside/wetside lying around?

One of my MP10's dryside pooped out last weekend and in the process of troubleshooting it, I broke my wetside as well. My driver box is still functional so I now in search of a replacemente dryside/wetside. I was originally going to order a replacement dryside online, but I can't seem to find any vendor that sells the non-QD drysides anymore.

-Xiaoxi

EcoTech sales both Dry & Wetsides.

https://store2.ecotechmarine.com/collections/vortech/products/dry-side-assembly-for-mp10

https://store2.ecotechmarine.com/collections/vortech/products/wet-side-assembly-for-vortech-mp10

 

The Difference in (Quite Drive) Is the Circuit board in the controller.

 

Though hopefully someone around here might have a used one for cheaper :)

Share this post


Link to post
xiaoxiy

 

8 hours ago, Exodus said:

EcoTech sales both Dry & Wetsides.

https://store2.ecotechmarine.com/collections/vortech/products/dry-side-assembly-for-mp10

https://store2.ecotechmarine.com/collections/vortech/products/wet-side-assembly-for-vortech-mp10

 

The Difference in (Quite Drive) Is the Circuit board in the controller.

 

Though hopefully someone around here might have a used one for cheaper :)

Apparently those are incompatible with the old nonQD drivers :( 

Share this post


Link to post
  • Recommended Discussions

×
×
  • Create New...