Jump to content
Andreww

ADA - the 2 island reef

Recommended Posts

Your tank is looking great and love the idea for the clam. 

-D

  • Like 1

Share this post


Link to post
3 hours ago, DaveFason said:

Your tank is looking great and love the idea for the clam. 

-D

Thanks Dave! 

Share this post


Link to post

So now that the 2 returns have been drilled, locline fittings installed, the new Eheim pump hooked up this evening, I LOVE the flow I’m getting in the tank all over the place.

 

The right amount to the all the right places.

Before, even with the MP-10 , I would have dead spots and in some places too much flow. 

 

I’m pushing about 600-650GPH through the overflow now which I think is at the limit for 1” plumbing. I was just barely able to fine-tune it to dead silent with the bean animal configuration but any more flow and I would have had to t-off the return back into the sump. I have the 1.5” drains reduced to 1”.

 

The overflow can handle 2500gph but the sweet spot based on Reef Synergy’s input is 1500GPH with 1.5” drains. 

 

Also put back the light diffuser I made, I really need to look into having it custom made to fit the light perfectly with the factory screws.TAP plastics should be able to do it but they’ll charge an arm and a leg I’m sure . The shimmer is super nice and even, even with crazy surface agitation.

As a result, I turned up the lights another 20% to compensate for the PAR loss through the frosted acrylic.

Need to rent a PAR meter from BRS now that they carry them to dial in the lights.

 

Anyhow, with that pointless rumble out of the way, here’s a couple pics ,cuz we all know a picture is worth 1000 words.Thinking if it, maybe I should have just posted the pictures and skip all the words lol

 

 

 

 

8626F038-7004-4F85-9BC9-3ECA498734A4.jpeg

97902567-0856-4923-B1AE-BD37524C0E6E.jpeg

A444EB48-5730-4AB6-AC3B-F0AAC54BEA9C.png

Share this post


Link to post

Took a quick video to show what the diffuser does to the shimmer even with a lot of water movement.

Also the static tv look / disco ball is gone. Nice even shimmer.

Theres still some bryopsis/GHA present in the tank but now with regular cleaning/plucking it’s less and less visible in case you were wondering what the fuzzy stuff on some of the rock is; lol

 

  • Like 2

Share this post


Link to post

Pink lemonade showing strong signs of recovering in my tank. Pretty happy about it.

2561027C-FA40-4535-BEDC-990F9911D9F3.jpeg

  • Like 2

Share this post


Link to post

That's a big Anthias you got there.

Loving the scape in this. 😎

Share this post


Link to post
4 minutes ago, Pinner Reef said:

That's a big Anthias you got there.

Loving the scape in this. 😎

Thanks!

I think he looks bigger than he really is lol

He is about 3” long at the moment. Will grow more no doubt. I thought no fish will survive my female clown aggression but this guy is a fighter. Up in the clown’s face mouth wide open and fins spiked up. Even bites her if she dares challenging him.

But it’s over quickly, they stay in the same general area and don’t bother each other much.

When it’s time, the lyretail will be rehomed .

  • Like 1

Share this post


Link to post

Looks like my clowns have been spawning.

 

A76B0944-42B7-418E-B862-D572B43417F8.jpeg

  • Like 3

Share this post


Link to post

I removed the Favia from the overflow. I didn’t think long term when I attached it there. It was going to be a problem for the SPS once everything took off and got close to each other.

Glue still looking ugly there but I think I’m going with a few pieces of rainbow montipora to cover the overflow. Should look pretty nice once they fill in.

4CEF93FB-ADAF-45D9-A3B9-D4A17A1AB88B.jpeg

  • Like 1

Share this post


Link to post

Fed the tank; not the usual spot fed...broadcasted various blended frozen foods, and the acros are liking it. Never seen such a great response...maybe hard to spot from these pictures.

Will do this more often I guess.

274B6D99-A11A-47BA-8657-3CD70CD018E8.jpeg

53BB1672-51CE-446F-9F81-726786C79EAD.jpeg

  • Like 1

Share this post


Link to post

I’m glad the drilling worked out. Seems like a really nice upgrade. Your reef is looking great, the 2 islands just works in that ADA. I’m a bit jealous as I have always wanted an ADA reef. 

Share this post


Link to post
16 minutes ago, blizzardscout2 said:

I’m glad the drilling worked out. Seems like a really nice upgrade. Your reef is looking great, the 2 islands just works in that ADA. I’m a bit jealous as I have always wanted an ADA reef. 

Thank you. I wish I had more room front to back to create a nicer aquascape but for now it’ll have to do until we move into a new house.

 

No doubt ADA tanks are in my opinion perfect tanks in terms of build quality(at least the ones I’ve seen) but also overpriced if you go above the 20 gallon mark.

Makes Elos tanks seem like a bargain.😆

 

 

Share this post


Link to post

Added 2 frags of rainbow montipora. Glued them to the overflow, hoping they will take over and hide it somewhat.

The frags have a sharp edge because of the cut and are pretty thick so I’m thinking to place a couple pico magnetic rocks from @NanoRox onto the overflow right next to the montis to taper down the edge. If they will encrust on them they will look more natural that way. Don’t know, we’ll see. Gotta give them some time to make sure they’re liking that spot then go ahead with the plan.

7B8B4D34-1387-4F8C-BB93-8B0788B8C929.jpeg

Share this post


Link to post

Sounds like a good plan.  Depending on the soze of the frags, the Troy Acan might also look really nice as a ledge 

Share this post


Link to post
5 minutes ago, NanoRox said:

Sounds like a good plan.  Depending on the soze of the frags, the Troy Acan might also look really nice as a ledge 

I looked into it, but it will shade the clam underneath. Can’t have that happening 🙂

The small pieces should be great .

I PM’d you about the custom overflow insert but I think I’ll scrap that idea ...maybe on a next build👍🏻

Share this post


Link to post
14 minutes ago, Andreww said:

I looked into it, but it will shade the clam underneath. Can’t have that happening 🙂

The small pieces should be great .

I PM’d you about the custom overflow insert but I think I’ll scrap that idea ...maybe on a next build👍🏻

Ah makes sense.  Yeah I replied to your PM.  If you do that in the future just let me know.  In this case you are absolutely correct that the picorox don’t stick out far at all so would look awesome.  

Share this post


Link to post

Ordered Phosphate RX which looks like it is lanthanum chloride in the correct concentration.

Should be here tomorrow. Would be interesting to see how it works compared to the GFO.

 

Share this post


Link to post

Dive in and share your thoughts!

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recommended Discussions

×