Jump to content
Premium Aquatics Aquarium Supplies

Barton's 5g Pico powered by AI Prime HD


mbarton2010

Recommended Posts

On 4/20/2017 at 9:35 PM, Mkbarton said:

I moved the teeny tiny hammer down to the right side by itself and moved the torch kinda under the arch. It's been pissed for a few weeks now. Not showing any skeleton or receding but it's just not opening like it should

 

Is the flow stronger where it's at?

They usually don't like strong flow. 

Link to comment
mbarton2010

FTS. Had to adjust the lights a little. RFA in the middle is doing good. The little one really hasn't done much but it's still kicking

IMG_0161.JPG

  • Like 3
Link to comment
mbarton2010
3 hours ago, Weetabix7 said:

The Dude is cute. 

Wait, is this a 5g tank???

That must be a really small Clown.

He is tiny. Maybe 1.5" 

Link to comment
12 minutes ago, Mkbarton said:

He is tiny. Maybe 1.5" 

 

That's about the size of the one I just got. 

You'll just have to upgrade to a bigger tank as he grows!! :D

  • Like 1
Link to comment
mbarton2010
1 hour ago, Weetabix7 said:

 

That's about the size of the one I just got. 

You'll just have to upgrade to a bigger tank as he grows!! :D

I have my 15'' PicO Aquariums Cube still :D

  • Like 1
Link to comment

@Mkbarton

 

Are you running the stock pump?

 

Do you find that the pump and power head are too much for your little clown?

 

2 weeks ago I got a clown the same size in my Spec V and he really only stays on the right side of the tank where the rock blocks a lot of the flow of water. I am running the AQ600 (159gph) pump in place of the stock one and no power head. I have pointed the output nozzle in every direction it can go and he just doesn't like the flow it seems.

Link to comment
1 hour ago, colinlevy said:

@Mkbarton

 

Are you running the stock pump?

 

Do you find that the pump and power head are too much for your little clown?

 

2 weeks ago I got a clown the same size in my Spec V and he really only stays on the right side of the tank where the rock blocks a lot of the flow of water. I am running the AQ600 (159gph) pump in place of the stock one and no power head. I have pointed the output nozzle in every direction it can go and he just doesn't like the flow it seems.

 

Maybe he's just hosting that corner of the tank. 

(seriously.)

  • Like 1
Link to comment
mbarton2010
7 hours ago, colinlevy said:

@Mkbarton

 

Are you running the stock pump?

 

Do you find that the pump and power head are too much for your little clown?

 

2 weeks ago I got a clown the same size in my Spec V and he really only stays on the right side of the tank where the rock blocks a lot of the flow of water. I am running the AQ600 (159gph) pump in place of the stock one and no power head. I have pointed the output nozzle in every direction it can go and he just doesn't like the flow it seems.

I have the AQ600 too plus the Koralia nano 425. Mine hosts my mag cleaner wherever I put it ?

I also picked up 3 zoa frags and another Acan frag

Link to comment
mbarton2010

My growing zoa garden.

 

the closed ones look like purple hornets but the ring around the mouth isn't green (yet?) I got all three zoas and the Acan which is green, brown grey and purple(can't get a pic of the colors to save my life) for $40

IMG_0177.JPG

Going to glue them all on the rock in a bit

  • Like 2
Link to comment
mbarton2010

So rescaped the tank (again ?) left a lot of open real estate on the right side. I have a piece of dry rock I'm gonna break up and make little islands. Might make the right side a macro forest ?

Everything is pissed from the rescape :lol: 

image.jpg

  • Like 3
Link to comment
Weetabix7
2 minutes ago, WV Reefer said:

What about macros AND gorgs?  :happy:

 

I second this suggestion. ^^^^

I have Macros I can send....

  • Like 1
Link to comment
mbarton2010

So everything is happy and open after the rescape. I really thought I killed my new Acan frag because I took it off the plug and the skeleton cracked in half :o but it's glued on a rock now and it's open and fluffy

Link to comment
mbarton2010
13 hours ago, Weetabix7 said:

 

I second this suggestion. ^^^^

I have Macros I can send....

How much shipped for some macros? Kinda short on cash this week 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recommended Discussions

×
×
  • Create New...