DesertReefer77 Posted January 24, 2017 Share Posted January 24, 2017 So I have a guy who built my LED setup for me. The lights work, but just at 100%, can't dim them. Here is the setup he sent me. Blue light on. Synced to phone. Blink up done. Hooked up to wifi. Output voltage is 2.94v. Using mini USB power supply. Using channels 1-5, using channel 1 + and -, channels 2-5 just +. 3 LDD-H drivers per channel Anyone have a suggestion to try and get this working? Not sure if it will help but I've attached a picture of the setup. Link to comment
jedimasterben Posted January 24, 2017 Share Posted January 24, 2017 Make sure all grounds on all boards and power supplies are tied together. Link to comment
SpencerShepard Posted January 24, 2017 Share Posted January 24, 2017 Replied to your email with the same suggestion. Link to comment
DesertReefer77 Posted February 1, 2017 Author Share Posted February 1, 2017 Got the email, Josh (builder) tried it, and didn't work...he emailed support back. Believe he is getting cross talk from the 3 different power supplies. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.