dpetty Posted December 9, 2016 Share Posted December 9, 2016 3.3V PWM VS 5V PWM What is the difference in controlling a Mean Well LDD-H Driver? Link to comment
jedimasterben Posted December 9, 2016 Share Posted December 9, 2016 Depends on what controller you're using to what signal it outputs. Link to comment
dpetty Posted December 10, 2016 Author Share Posted December 10, 2016 The Bluefish Mini uses 3.3V PWM and the Bluefish uses 5V PWM to control the driver, just wanted to know the difference if there is any. Link to comment
jedimasterben Posted December 10, 2016 Share Posted December 10, 2016 The Bluefish Mini uses 3.3V PWM and the Bluefish uses 5V PWM to control the driver, just wanted to know the difference if there is any. Both fall within the dimming voltage range of the LDD-H, so there will be no difference between the two in that regard. If you do not need the 10v capabilities of the full controller, then there is no point in stepping up from the Mini. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.