wallywaltt Posted August 10, 2004 Share Posted August 10, 2004 Here are a few questions for everyone. - What is an ideal flow rate for a 10 gallon, SPS dominated tank (GPH?) -What is the best way to distribute this amount of flow? (How many powerheads, at what flowrates, a HOB filter, etc.) -Should these devices be on a wavemaker? I'm trying to figure out the ideal flow for a 10 gallon SPS, so any info. would be greatly appreciated. Thanks. Link to comment
wallywaltt Posted August 10, 2004 Author Share Posted August 10, 2004 ok... how does two minijet 606's facing each other, opposite ends and a ac500 fuge on back? Link to comment
pyrrhus Posted August 11, 2004 Share Posted August 11, 2004 that should be sufficient, i use a minijet 404 and an ac300 fuge on my 10g softie tank. i hope you have MH for your tank if you want to do SPS Link to comment
Xx_de_xX Posted August 11, 2004 Share Posted August 11, 2004 A mag 7 on a closed loop workin a mod'd and ported scwd would do nicely too. Link to comment
wallywaltt Posted August 11, 2004 Author Share Posted August 11, 2004 Well I also found some great info. over at RC about flow in an SPS dominated tank, give it a look: http://www.reefcentral.com/forums/showthre...threadid=403161 Link to comment
bickmade Posted August 12, 2004 Share Posted August 12, 2004 from what I have one my 10g i have my flow directly on my SPS and they like it I cant remember what powerhead I have Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.