Rpc07 Posted March 31, 2016 Share Posted March 31, 2016 I'm switching from stock biocube lighting to the ai prime what is a good starting point? Thanks Quote Link to comment
FlamingPrawn Posted April 14, 2016 Share Posted April 14, 2016 Has anyone used this on a CAD 4? Mine will be here Monday and just looking for recommendations for mainly zoas Quote Link to comment
FlamingPrawn Posted April 17, 2016 Share Posted April 17, 2016 So I got my Prime installed today... Here are my values. Just wondering if they're too low / too high or any suggestions welcome 3am: 20k @ 1% 7am: 20k @ 5% 10am: 14k @ 20% 4pm: 14k @ 20% 7pm: 20k @ 5% 11pm - 3am : off Tank is going to be strictly Zoas Quote Link to comment
shotik Posted April 22, 2016 Share Posted April 22, 2016 I edited a file from OCNcheffy for lower light intensity (small tank). I prefer the blue light and a lot of white in my marine tank dislikes. it's like ok? Zoas, Soft, Euphyllia, Caulastrea How Long Installed: Current Settings: - Times 8AM-11PM - Lunar/Weather NO/Yes Initial Settings: Height Above Water:10" Tank Type: - Size 50x30x35cm (20g)- Brand DIY Additional Comments: https://dl.dropboxusercontent.com/u/7116415/AI%20Setting.aip Quote Link to comment
Briannm23 Posted April 26, 2016 Share Posted April 26, 2016 Anybody have a setup for a JBJ 20 gallon rimless frag tank? Just got my AI Prime and seeking help. Quote Link to comment
Got Corals Posted April 26, 2016 Share Posted April 26, 2016 I am having a problem with AI Prime... I unhooked it to take it to Reef A Palooza and now the light is not working. I can't see the light on My AI on my laptop. IS there anyway to reset the entire light.. PLEASE HELP!!! Quote Link to comment
StrainedSky Posted April 27, 2016 Share Posted April 27, 2016 I am having a problem with AI Prime... I unhooked it to take it to Reef A Palooza and now the light is not working. I can't see the light on My AI on my laptop. IS there anyway to reset the entire light.. PLEASE HELP!!! Hold the reset button for 3 seconds. 1 Quote Link to comment
Got Corals Posted April 27, 2016 Share Posted April 27, 2016 Omg!! Thank you. I feel stupid but so grateful you told me. Lol. 2 Quote Link to comment
AUSSIE NANO Posted May 1, 2016 Share Posted May 1, 2016 AI PRIME Settings Format How Long Installed: 1 month Current Settings: - Colors All set to 100% - Times 10 hours per day - Lunar/Weather Yes/No NO Initial Settings: 100% Weekly Ramping: N/A Height Above Water: 12" Tank Type: - Size 5 gallons- Brand (examp: JBJ 28 AIO) Ocean Free - Downloadable Settings (Optional) - Photo (Optional) Additional Comments: AI Prime settings as per the aquaristic shop own settings and their advice. 100% 8 00am to 6 00pm. The shop showed me PAR readings under their Primes and max was 250 on the bottom in their 12" deep holding tanks. They run pairs of Kessel 90 watt in the larger holding tanks for PAR on bottom of 200. Depth is 16". Quote Link to comment
rsaesq@gmail.com Posted May 17, 2016 Share Posted May 17, 2016 Ok. Was able to find the prime on the router. All are at 100% 6.5k DR: 100 V: 55 DB: 55 UV: 55 CW: 75 GR: 100 B: 55 10k DR: 100 V: 88 D: 88 UV: 88 CW: 100 GR: 100 B: 88 12k All value at 100 14k DR: 45 V: 100 DB: 100 UV: 100 CW: 45 GR: 45 B: 100 16k (setting I am using for the moment) DR: 35 V: 100 DB: 100 UV: 100 CW: 35 GR: 35 B: 100 18k: DR: 25 V: 100 DB: 100 UV: 100 CW: 25 GR: 25 B: 100 20k: DR: 17 V: 100 DB: 100 UV: 100 CW: 17 GR: 17 B: 100 I know this is an old thread but I just recently got the AI Prime. What are the different "k" settings (6.5 k, 10k, 12k, etc.)? I can adjust the percentages on the individual colors, but what do the k numbers represent? Thanks! Quote Link to comment
rsaesq@gmail.com Posted May 17, 2016 Share Posted May 17, 2016 I know this is an old thread but I just recently got the AI Prime. What are the different "k" settings (6.5 k, 10k, 12k, etc.)? I can adjust the percentages on the individual colors, but what do the k numbers represent? Thanks! Disregard. I got it. Kelvin temps. Quote Link to comment
StrainedSky Posted June 3, 2016 Share Posted June 3, 2016 Here's my newly updated settings! My post before was actually far to strong for some chalice, favia, and zoa families. Almost every single one of my corals are reacting better and have better color with these settings. https://www.dropbox.com/s/pxoszxz0btq0nme/AI%20Setting.aip?dl=0 Any chance you can reupload this ? Really enjoy the schedule, reset mine so I lost it. Quote Link to comment
vision Posted June 6, 2016 Share Posted June 6, 2016 Any chance you can reupload this ? Really enjoy the schedule, reset mine so I lost it. if you can, please! Quote Link to comment
OCNcheffy Posted June 6, 2016 Share Posted June 6, 2016 Hey guys, Sorry for the late replies as some of you have been asking for a re-upload of my settings. Here's the new link: https://www.dropbox.com/s/4n5ieew42vu6z6h/CHEFFY.aip?dl=0 Enjoy! 2 Quote Link to comment
StrainedSky Posted June 7, 2016 Share Posted June 7, 2016 ................Thanks for uploading................. CHEFFY.zip Quote Link to comment
NanoReefer147741 Posted June 8, 2016 Share Posted June 8, 2016 New to the forums... this is a fun thread. Here are my settings: 7 inches above the water on an IM Fusion 10 Mostly SPS, some LPS, no softies Blackout from 10:30pm to 6:30am 6:30am to 8am ramp up to 12% V, 24% DB, 12% B 8am to 1:30pm ramp up to 99% UV, V, DB, B and 68% everything else 1:30pm to 7pm ramp down to 12% V, 24% DB, 12% B, and 0% everything else 7pm to 10:00pm 12% V, 24% DB, 12% B 10:00pm to 10:30pm ramp down to everything zero Blackout until 6:30am.... Quote Link to comment
TOURING Posted June 19, 2016 Share Posted June 19, 2016 Hello everyone! i just purchased this light and am very excited to use it over my 20g obj rl. I'm going to run cheffys program and see how that turns out. i like a very blue tank. i hope that will be okay. thank you Quote Link to comment
Nehsmit Posted July 7, 2016 Share Posted July 7, 2016 Just got my AI Prime HD Today. Setup using Cheffys program. Have softies and LPS. How's his settings working for everyone else? Should the whites be brightened up at all? Lastly which particular color, if any, is best for growth of corals? Do whites offer much in terms of growth? Quote Link to comment
jeffmr4 Posted July 9, 2016 Share Posted July 9, 2016 i've changed my settings from the original ones. I went by the guidelines in the .pdf and halved them. Then I turned acclimation mode on 75% for three weeks settings times 8 am to 3 pm, 4 hour ramp uv 20%, v 15%, rb 45%, b 42%, g 12%, dr 15%, cw 32% lunar 10 pm to 5 am rb 5% storm no height above water 10" tank Coralife Biocube 14 not sure if the light intensity is still too much. My anemone shrunk after about 3 pm so I turned on acclimation mode for 3 weeks. I also have a gsp. Quote Link to comment
thaz508 Posted September 24, 2016 Share Posted September 24, 2016 How Long Installed: 1 monthCurrent Settings:- Colors UV/70 V80 DB/75 B/85 G/60 DR/65 CW/70- Tiimes 3hr ramp up starting at 10am, reaching peek at 1pm-7pm, then 3hr ramp down to lights off at 10pm- Lunar/Weather NoHeight Above Water: 10.5 inchesTank Type: MIX REEF- Size 24G AIO- Brand SCAquariums AIO Photos Quote Link to comment
justin81 Posted September 29, 2016 Share Posted September 29, 2016 I would love some critiques to my schedule. I have messed with so many settings but I'm looking for maximum coral growth and nice 14k look. Also I have been keeping green/red low to reduce algae. How much truth is there to that? And UV I keep a little lower. I'm not sure what it should be set at. How Long Installed: 1 monthCurrent Settings: AI PRIME HD- Colors UV/60 V/100 DB/122 B/111G/40 DR/20 CW/45- Tiimes 3hr ramp up starting at 8am, reaching peek at 11am-8pm, then 3hr ramp down to lights off at 11pm- Lunar/Weather Yes/NoHeight Above Water: 10 inchesTank Type: MIX REEF - Toadstool Leather, GSP, GBTA, Monti Cap, adding in tons of Euphyllia and LPS over the next year- Size 29g- Brand Coralife Biocube Photos Quote Link to comment
ReefSafeSolutions Posted September 29, 2016 Share Posted September 29, 2016 Also I have been keeping green/red low to reduce algae. How much truth is there to that? For what it's worth, I've got my red and green both set to around 15%. I've seen my algae decreasing over the past couple of weeks. Obviously the red and green aren't causing the algae to disappear (just new tank diatoms slowly disappearing) but I haven't noticed them causing more algae to grow. Quote Link to comment
justin81 Posted September 29, 2016 Share Posted September 29, 2016 Cool I'll try them both at 15%. What about UV. Is everyone just cranking to 100% Quote Link to comment
pdiehm Posted January 23, 2017 Share Posted January 23, 2017 Here's my newly updated settings! My post before was actually far to strong for some chalice, favia, and zoa families. Almost every single one of my corals are reacting better and have better color with these settings. https://www.dropbox.com/s/pxoszxz0btq0nme/AI%20Setting.aip?dl=0 i am trying to save them so I can add to my light, but seeing the link is broken. Quote Link to comment
Shoob1e Posted January 24, 2017 Share Posted January 24, 2017 Anyone have updates on there lighting? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.