OCNcheffy Posted July 13, 2015 Share Posted July 13, 2015 I had my lunar mode set 11pm to 2am, you are saying it's incorrect, and that I want 11pm to 2am....unless that's a typo, that's what I have [/quote Re-read your post. You said I have my lunar mode set from 11am to 2am. Quote Link to comment
pdiehm Posted July 13, 2015 Share Posted July 13, 2015 oops. so yeah, I have lunar sent from 10pm - 2am. I went into Easy Mode: 3 Hour Ramp time Sunrise 11am (lights ramp up at 8) Sunset 7pm (Lights ramp down at 10). Lunar 10pm - 2am, all at 5% (or should I just have the deep blue on at 5% since technically it's moonlight?) Cool White: 30 Deep Blue: 100 Deep Red: 60 Green: 60 Blue: 100 UV: 70 Violet: 70 1 Quote Link to comment
pdiehm Posted July 14, 2015 Share Posted July 14, 2015 Ok. Was able to find the prime on the router. All are at 100% 6.5k DR: 100 V: 55 DB: 55 UV: 55 CW: 75 GR: 100 B: 55 10k DR: 100 V: 88 D: 88 UV: 88 CW: 100 GR: 100 B: 88 12k All value at 100 14k DR: 45 V: 100 DB: 100 UV: 100 CW: 45 GR: 45 B: 100 16k (setting I am using for the moment) DR: 35 V: 100 DB: 100 UV: 100 CW: 35 GR: 35 B: 100 18k: DR: 25 V: 100 DB: 100 UV: 100 CW: 25 GR: 25 B: 100 20k: DR: 17 V: 100 DB: 100 UV: 100 CW: 17 GR: 17 B: 100 3 Quote Link to comment
ca2or Posted August 16, 2015 Share Posted August 16, 2015 How Long Installed: 2 Weeks Current Settings: - Lunar/Weather: Yes/No Initial Settings: Current settings I have now. Weekly Ramping: 0% Height Above Water: 8" above water. Tank Type: - Size: Nuvo 16 Gallon - Brand: Innovative Marine Additional Comments: Currently running one Prime in the middle with two Par38's on each side. The par38 seem to output more light and my corals are already acclimated to that, hency why I've set the Prime so high right off the start. No corals are in the middle of the tank either. Actual numbers please Quote Link to comment
schgr.cube Posted August 19, 2015 Share Posted August 19, 2015 I have an IM Nuvo 10 gallon, does everyone think that 8-10" off the water is about right for this light? I will be adjusting the intensity when I add coral in, just want to make sure the light mount I am building is correct. Quote Link to comment
Dazed1 Posted August 22, 2015 Share Posted August 22, 2015 How Long Installed: 2 Weeks Current Settings: - Lunar/Weather: Yes/No Initial Settings: Current settings I have now. Weekly Ramping: 0% Height Above Water: 8" above water. Tank Type: - Size: Nuvo 16 Gallon - Brand: Innovative Marine Additional Comments: Currently running one Prime in the middle with two Par38's on each side. The par38 seem to output more light and my corals are already acclimated to that, hency why I've set the Prime so high right off the start. No corals are in the middle of the tank either. Can you export your settings please? Quote Link to comment
schgr.cube Posted August 23, 2015 Share Posted August 23, 2015 Can you export your settings please? He already posted it on dropbox, its been great for me so far! I haven't adjusted a thing. https://www.dropbox.com/s/pxoszxz0btq0nme/AI%20Setting.aip?dl=0 1 Quote Link to comment
Dazed1 Posted August 23, 2015 Share Posted August 23, 2015 He already posted it on dropbox, its been great for me so far! I haven't adjusted a thing. https://www.dropbox.com/s/pxoszxz0btq0nme/AI%20Setting.aip?dl=0 Thanks! Hand't seen it. I'm creating a dropbox folder with all the settings that I find. Good to try out! Quote Link to comment
Dazed1 Posted August 23, 2015 Share Posted August 23, 2015 Here's my setting. I just got the light yesterday and have no corals yet, so take it with a grain of salt DR, G, CW : 23 B, DB, V, UV: 40 Sunrise: 10am with a 2 hour ramp. Sunset: 8pm https://www.dropbox.com/s/hamqgrxkl0zr4i4/Dazed1%20-%20AI%20Setting.aip?dl=0 Quote Link to comment
OCNcheffy Posted August 23, 2015 Share Posted August 23, 2015 He already posted it on dropbox, its been great for me so far! I haven't adjusted a thing. https://www.dropbox.com/s/pxoszxz0btq0nme/AI%20Setting.aip?dl=0 Thanks for the feedback! I actually raised the whites another 10% as the corals seem to like it more as well. Glad to hear it's working out for you. 1 Quote Link to comment
Austintylerl Posted August 25, 2015 Share Posted August 25, 2015 Glad I revisited this forum. I had my my violet and uv down LOW. Like an idiot I was wondering why soft coral growth was lacking. Quote Link to comment
R3rueda Posted August 27, 2015 Share Posted August 27, 2015 How do I import? disregard...."no discussion" Quote Link to comment
schgr.cube Posted August 27, 2015 Share Posted August 27, 2015 Has anyone messed around with creating a good manual setup for the best iPhone photography? I feel like this light is a nightmare to photograph with my phone. 1 Quote Link to comment
manycolors Posted September 17, 2015 Share Posted September 17, 2015 AI PRIME Settings Format How Long Installed: 2 Weeks Current Settings: At "Mid-Day" DR:59 UV:95 DB:95 V:70 CW:72 G:59 B:90 Initial Settings: Easy- 10 hours with 2hr ramp on each end at about 12K color Weekly Ramping: From 50% to 95% over 1 month period Height Above Water: 8 inches above the surface, about 18" from coral Tank Type: - 14 Gallon- Brand: Fluval Additional Comments: I just got this light about 2 weeks ago and really like it so far. (My past experience with LED and mixed reef was a bad one, so I was taking a leap here by purchasing this unit for my rimless reef) Let me start by saying it's great quality(so far)/features at a good price. I will continue to tweak the light until I get it right where I(and the corals) want it. The tank mount and light is flawless, no more drooping issues since the mount update. My theory is to replicate the natural reef (tweaked to my life style) as much as possible. I feel the light is a large part of making the fish and corals feel at home. The suns intensity is parabolic- So my graph is as well. I feel I have more tweaking on intensity of certain colors to do- but some of it will be guided by research and some trial and error. Only cons I can think of is that I wish the moonlight was a little dimmer since I am using Lunar Cycle but I feel "5" is too bright to be a "Moon." But that's being picky Overall I am satisfied and I would recommend this product to anyone reading and I really look forward to hearing and seeing peoples experiences (Good and Bad) with this light. There is a very high level of customization that the possibilities are endless! -Happy Reefing 2 Quote Link to comment
parsec Posted September 28, 2015 Share Posted September 28, 2015 Running Red Sea Reefer 250 (55 Gallon display) 2 AI Primes Both are at 14,000K @ 100% about 7 inches above water Quote Link to comment
brunofcn Posted October 14, 2015 Share Posted October 14, 2015 Hello, recently I bought a prime there and I'm having a little trouble . If possible , I wonder how do I save my settings api ? And as I apply the AI settings peer group ? I want to make my same settings to OCNcheffy . Thank you. Quote Link to comment
optimusdude Posted October 17, 2015 Share Posted October 17, 2015 How Long Installed:3 weeks Aug 28 2015 Current Settings: - Colors - Times Sunrise 8am/sundown 8pm 2 hour ramp up/down - Lunar/Weather Yes/No Initial Settings: Weekly Ramping: Height Above Water:8" Tank Type: - Size :12g - Brand:JBJ Nanocube DX - Downloadable Settings (Optional) - Photo I am relatively new to marine aquariums So I'm not sure what to expect from the AI prime. So far all seems good and the coraline is going crazy as well as the few corals I have in the tank. The controllability of the prime is fairly easy and very flexible. I haven't messed with the acclimation mode yet. Currently I am setting up A 20x20 cube and will be using the prime on that tank when its ready. Pictures are first day of the prime to current day. Quote Link to comment
itstonyyy Posted October 19, 2015 Share Posted October 19, 2015 anyone else out there that can share their settings with uploading .aip file? SO I can just download. Thanks. Quote Link to comment
itstonyyy Posted October 19, 2015 Share Posted October 19, 2015 bump. Anyone else with .aip file?? Quote Link to comment
trurock Posted October 26, 2015 Share Posted October 26, 2015 Thanks for the feedback! I actually raised the whites another 10% as the corals seem to like it more as well. Glad to hear it's working out for you. Love the settings! how exactly did you turn the whites up? you'll have to forgive me. Im not very savvy with app yet. Quote Link to comment
Scubasteve21 Posted October 28, 2015 Share Posted October 28, 2015 How Long Installed: 4 weeks Current Settings: 85% - V, DB, B, UV 35% - G, DR, CW Lunar: yes Ramping: 4 hour ramp Height Above Water: 3" (in hood mod) Tank; biocub 14g Additional Comments: I have a really cool ramp up/down and setting for viewing coral in the morning and night...(update, corals are noticeable happier than older led setup with just blue and white leds, also really enjoying the uv,v,db viewing time) I run the violet on 1% for night...every other led has too much or wrong color light, even 2% Violet had my whole tank still awake. Could also run DR at 1% Updated photos 1 Quote Link to comment
brunofcn Posted October 31, 2015 Share Posted October 31, 2015 I figured out how to save APIs in our luminaires .The process is quite simple.By configuring the computer , has a icon to share . When you click the icon there are two options : download and upload.Download you save your settings.Upload you apply the other settings on your light fixture.That's it.Hugs. Quote Link to comment
gmanreefer Posted November 3, 2015 Share Posted November 3, 2015 Question guys, I see your are posting pics of the AI prime settings on your computers and thus can download the preset file and load it through your computer. I only know how to access the prime through my iphone . How do you guys get into the prime through your pc and apply the settings through a preset file? Thanks 1 Quote Link to comment
Scubasteve21 Posted November 4, 2015 Share Posted November 4, 2015 I think you have to buy a cable...I use my iPhone...and pics above are from phone app 1 Quote Link to comment
Sancho Posted November 4, 2015 Share Posted November 4, 2015 Question guys, I see your are posting pics of the AI prime settings on your computers and thus can download the preset file and load it through your computer. I only know how to access the prime through my iphone . How do you guys get into the prime through your pc and apply the settings through a preset file? Thanks I I have found the IOS app sucks giant dick compared to the android app....yes giant dick. Huge difference I dont understand why so different but they are. PC or MAC set it up on myai.com dont waste your time with the IOS app. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.