Milad LEDGroupBuy.com Posted April 15, 2014 Share Posted April 15, 2014 Are you one of the lucky people that has a Lumia 5.2? Here is a easy way to run your Lumia with one simple driver. Makers 5UP Driver Pro Link to comment
Horerczy Posted April 15, 2014 Share Posted April 15, 2014 I was wondering when they were finally going to show that off. I saw bits of an accidental teaser on their site a few months ago. Link to comment
spazizz Posted April 15, 2014 Share Posted April 15, 2014 Interesting, seems like diy is becoming simpler. Am i interpreting this wrongly? Link to comment
Milad LEDGroupBuy.com Posted April 15, 2014 Author Share Posted April 15, 2014 Interesting, seems like diy is becoming simpler. Am i interpreting this wrongly? Correct Simpler, better, faster, stronger... wait is there a song for this? Link to comment
andru1313 Posted April 15, 2014 Share Posted April 15, 2014 LOL where were you last month!!!!! Link to comment
Mr. Microscope Posted April 15, 2014 Share Posted April 15, 2014 Cool! That looks like a very clean way to wire up your channels. Another great product from LEDGB! Link to comment
Fishnoob Posted April 16, 2014 Share Posted April 16, 2014 Is this all I would need? (1) CREE Lumia 5.2 - 70w Full Spectrum 5 Channel CREE LED (5) Meanwell LDD-1000H LED Driver (1) 180w 48v 3.75A DC Power Supply (1) 5 Knob dimmer that I see in the picture above, but not on the site...? (1) 6" MakersLED Designer Heatsink Kit - Professional Grade - Anodized Anything I'm missing? Link to comment
Horerczy Posted April 16, 2014 Share Posted April 16, 2014 That 5 knob dimmer would likely be unnecessary unless you want a little manual control. You could just get a makers controller and use that instead and get all digital control. You would also want 3 700H and 2 100H as channels 1, 4, and 5 cannot deal with 1000mA of current. Link to comment
Milad LEDGroupBuy.com Posted April 16, 2014 Author Share Posted April 16, 2014 Is this all I would need? (1) CREE Lumia 5.2 - 70w Full Spectrum 5 Channel CREE LED (5) Meanwell LDD-1000H LED Driver (1) 180w 48v 3.75A DC Power Supply (1) 5 Knob dimmer that I see in the picture above, but not on the site...? (1) 6" MakersLED Designer Heatsink Kit - Professional Grade - Anodized Anything I'm missing? pretty much what horecrzy said dont really need the 5up dimmer just get the makerscontroller switch the 5x 1000H to 3x 1000H and 2x 700H meanwells in the future you can add another lumia without needing more power so you could stick with the 6" heatsink but if you got room, you could pickup the 12" Link to comment
Horerczy Posted April 18, 2014 Share Posted April 18, 2014 Still I can think of a few uses for the manual knob thing like running a fuge light on a timer instead of a controller. Link to comment
Yaman Posted April 18, 2014 Share Posted April 18, 2014 1000x2 and 700x3 , 2 channels on lumia@1000ma Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.