EastMtnReef Posted December 1, 2013 Share Posted December 1, 2013 As the title says, looking for anyone that is running the Auto Aqua Smart in a JBJ 28g. Interested in where you have it placed and how it is working out. thx! http://www.tbaquatics.com/auto-aqua-smart-ato-automatic-top-off-system-1531.html Link to comment
Titus Posted December 5, 2013 Share Posted December 5, 2013 I have one that I installed this week on a JBJ RL30. I believe your filtration setup is a little different than mine though... For the RL 30, the water overflows from the tank into media sections on both sides, and those sections flow into a center section where both return pumps are. I have the Autoaqua sensor in that center section with the return pumps. I believe the 28 is opposite mine, with all the water flowing from the tank into the center section which then flows out to the 2 outside chambers that each have a return pump, right? If so, you will want to put the sensor in one on the outer sections where a return pump is. It needs to go through clear glass, so if your tank has black vinyl on the back like mine, you need to remove a small piece of it for the sensor to shine through. Here is the review I wrote for it: http://www.nano-reef.com/topic/337528-autoaqua-smart-ato/ Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.