jack1978 Posted September 29, 2012 Share Posted September 29, 2012 I got my 40B drilled and painted. The stand is done...minus the doors. It's time to swap over everything from the 46 Bow with the cracked center brace. So, the question is how long does it take before I can run water through the freshly plumbed PVC? Not worried about leaking, just want to make sure the glue won't poison the inhabitants. Thanks, Jack Link to comment
seabass Posted September 30, 2012 Share Posted September 30, 2012 It should say on the container. Here's a link which might help. Overnight should be sufficient, but you might wait 24 hours just to be safe. Link to comment
uglybuckling Posted October 1, 2012 Share Posted October 1, 2012 I've done it with a lot less than that, during tank setup, and a few weeks later upon putting in livestock (15% water change in between), everybody was fine. Hell, I've done it with a lot less than that *and drank the water that went through the pipe.* Then again, that was when I was a kid and look what I grew into. JAY-ZUS. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.