Jump to content
Sign in to follow this  
phoenix91

Tips on fragging for a newbie

Recommended Posts

I've never fragged or moved any corals before but need to do it soon. I have a mushroom i want to move out of a 3 g and into my 20 g, i also want to move a small piece of pulsing xenia.

 

So.. how would i go about this?

 

I assume with the xenia i just slice off a branch and glue? it to a piece of rock? It's pretty tough stuff, this patch came back from the dead.

 

But what about the mushroom? it already moved off the frag plug it was on so is now attached to a large bit of rock

Share this post


Link to post

Mushrooms just cut them across the base as far down on the base as you can. Glue to a frag. Ive also used fishing line to tie a bow around the coral and the rock and small elastics work just as well. Another idea for soft corals and particularly mushrooms, you can have a pile of rubble rock in a container or separate tank and let the frags attach themselves. SPS and LPS are much easier to frag than softies. Its always a good idea to have an ice pick and wire cutters preferably brand new, to use for clipping rocks and frags.

Share this post


Link to post

I have a pile of small pieces of rubble rock i can use to attach frags to. With the mushroom i think i'll just cut it and sit it in a tub with some rubble in the tank. I think i have wire cutter somewhere too.

 

thanks

Share this post


Link to post

you can use eggcrate or knitting canvas for a top if you dont want it to float away

Share this post


Link to post

Good point, i did just get some eggcrate and will have spare bits.

Share this post


Link to post

Yep best way with mushrooms is to put some rubble in a tupperware or glass container, then put the frags in there with something covering the top like eggcrate and they will attach themselves to a piece of rubble.

Share this post


Link to post

Just bite them off with your teeth and use bubble gum to stick them down.

Share this post


Link to post
Just bite them off with your teeth and use bubble gum to stick them down.

Don't brush before.

Share this post


Link to post

I would like to ask something on this subject as well. If you attach a duncan to live rocks with crazy glue gel and epoxy at some point and let's say a couple of months later you need to frag it, you need to remove the whole piece off the rocks, right? Or do you frag it inside the tank?

Share this post


Link to post
Yep best way with mushrooms is to put some rubble in a tupperware or glass container, then put the frags in there with something covering the top like eggcrate and they will attach themselves to a piece of rubble.

 

Thanks. Yep, i'll be doing it later this week.

 

Just bite them off with your teeth and use bubble gum to stick them down.

 

lol

Share this post


Link to post
I would like to ask something on this subject as well. If you attach a duncan to live rocks with crazy glue gel and epoxy at some point and let's say a couple of months later you need to frag it, you need to remove the whole piece off the rocks, right? Or do you frag it inside the tank?

 

ideally you want to remove the whole rock before fragging anything. If you can possibly frag inside your tank without causing stress to corals around it, then that's possible too.

 

I've never fragged or moved any corals before but need to do it soon. I have a mushroom i want to move out of a 3 g and into my 20 g, i also want to move a small piece of pulsing xenia.

 

So.. how would i go about this?

 

I assume with the xenia i just slice off a branch and glue? it to a piece of rock? It's pretty tough stuff, this patch came back from the dead.

 

But what about the mushroom? it already moved off the frag plug it was on so is now attached to a large bit of rock

 

 

you will have a hard time just slicing then gluing it down as the mushroom and xenia are both slimy stuff. you are better off having it attach to some rubble first then gluing the rubble to your rock.

Share this post


Link to post

I haven't fragged yet...only one zoanthid got the guts to move from it's area and spread. But even so it's not coming into contact with anything else. I could have fragged my GSP off the bulky square frag it came on, but I don't feel like trying to peel that thing off (if anyone lives in the area and wants a go at it, please come by!).

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  
  • Recommended Discussions

  • Sign Up or Sign In to hide this.

×