91mini Posted March 14, 2012 Share Posted March 14, 2012 Many have recommended them so it looks like I will be buying from them. One question though. Can the hole saws that come with kits cut 2 holes through 1/4" glass? Anyone get 2 holes cut efficiently with one saw? Link to comment
91mini Posted March 14, 2012 Author Share Posted March 14, 2012 Probably closer to 3/8" glass now that I think about it. Link to comment
calvin415 Posted March 14, 2012 Share Posted March 14, 2012 I've drilled probably close to 20 holes with just one bit. Link to comment
hayseed777 Posted March 14, 2012 Share Posted March 14, 2012 Everything is good quality with glass-holes.com kits. I drilled my tank and had a buddy drill his two tanks with the same hole saws and they seemed to handle it all very well. Link to comment
iadubber Posted March 30, 2012 Share Posted March 30, 2012 I'm on 5 times use on one bit. Link to comment
basicfisherman Posted April 2, 2012 Share Posted April 2, 2012 I would imagine that the time to drill the holes gets a little longer after each hole but it will still drill. Link to comment
Degener8 Posted April 2, 2012 Share Posted April 2, 2012 I emailed glass holes support this same question. Their response was typically 8-10 hole pretty easily as long as you follow their instructions and keep the bits cooled etc. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.