Fluffeh Posted September 18, 2011 Share Posted September 18, 2011 im looking for one of those Y-shaped return outlets that will fit in the biocube29 return so that it pushes water out through 2 outlets. im hoping this will even out the flow in my tank. anyone have a link where i can get one? is there any modifications needed to make it fit on the return outlet? Link to comment
Gundad68 Posted September 18, 2011 Share Posted September 18, 2011 im looking for one of those Y-shaped return outlets that will fit in the biocube29 return so that it pushes water out through 2 outlets. im hoping this will even out the flow in my tank. anyone have a link where i can get one? is there any modifications needed to make it fit on the return outlet? Still got sand problems?I think that i read on here that you use the nozzel that came with your cube.An you pop it off and sand it to fit. http://www.marinedepot.com/Loc_Line_1_2_in...IFTLLHI-vi.html That is it I think. Link to comment
roly01 Posted September 18, 2011 Share Posted September 18, 2011 its called loc-line and you can usually get it a most LFS, only thing is once you get it, you need to slightly mod the one on the biocube by shaving it a little so it will snap on to the loc-line, because the one that comes with the biocube is a little wider then the standard loc-line size Link to comment
Fluffeh Posted September 18, 2011 Author Share Posted September 18, 2011 what exactly would i need to sand to make it fit? im a little confused. Link to comment
roly01 Posted September 18, 2011 Share Posted September 18, 2011 well pretty much the way loc-line works is that each piece snaps into the next piece problem is the one that comes stock on the biocube is not a standard loc-line size so i doesn't just snap in to the other adapters therefor you have to sand/shave it down a bit so they can snap in together Link to comment
Fluffeh Posted September 18, 2011 Author Share Posted September 18, 2011 well pretty much the way loc-line works is that each piece snaps into the next piece problem is the one that comes stock on the biocube is not a standard loc-line size so i doesn't just snap in to the other adapters therefor you have to sand/shave it down a bit so they can snap in together so am i going to need to sand down the locline itself or the return outlet of the biocube? Link to comment
roly01 Posted September 18, 2011 Share Posted September 18, 2011 the return outlet from the biocube Link to comment
Formula462 Posted September 18, 2011 Share Posted September 18, 2011 It's going to completely destroy the intensity of the current unless you upgrade your return pump to a MJ1200 or Rio 14 or 1600 Link to comment
Fluffeh Posted September 19, 2011 Author Share Posted September 19, 2011 i already have an mj1200, thats the reason i want the locline because i have too much flow right now. im still trying to figure out what i'll have to be sanding if i order this locline... anyone know? Link to comment
roly01 Posted September 20, 2011 Share Posted September 20, 2011 i already have an mj1200, thats the reason i want the locline because i have too much flow right now. im still trying to figure out what i'll have to be sanding if i order this locline... anyone know? i thought i made it rather clear, you have to sand the stock biocube joint so that it will click into the the two way loc-line socket. What part are you still trying to figure out? Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.