DK_Reef Posted January 28, 2011 Share Posted January 28, 2011 I am looking into getting a 57 gallon tank, 36L x 18 W x 21 H Same dimensions (LxW) as a 40GB , would a 40GB stand support it? Because I am looking up 40GB DIY stand plans and want to know if it can or what do i need to do to make it to be able to support it, Link to comment
Coastie Posted January 28, 2011 Share Posted January 28, 2011 It all depends on the stand.... If you are building one with 2x4's and plywood it should. Link to comment
DK_Reef Posted January 28, 2011 Author Share Posted January 28, 2011 yeah that is what material I wanted to use, Link to comment
fmfa0801 Posted January 28, 2011 Share Posted January 28, 2011 This is for my 50g Im setting up. Im sure you could copy it and work http://www.nano-reef.com/forums/index.php?...=260735&hl= Link to comment
DK_Reef Posted January 28, 2011 Author Share Posted January 28, 2011 This is for my 50g Im setting up. Im sure you could copy it and work http://www.nano-reef.com/forums/index.php?...=260735&hl= thanks im checking it out Link to comment
DK_Reef Posted January 28, 2011 Author Share Posted January 28, 2011 Anytime are you going to enclose it and put some doors one? that is a nice simple design, instead of the pine top could I do just a plywood or so Link to comment
fmfa0801 Posted January 28, 2011 Share Posted January 28, 2011 are you going to enclose it and put some doors one? that is a nice simple design, instead of the pine top could I do just a plywood or so I going to do stained oak on the sides and the one side with no support in the middle is going to open up. you could do plywood but i dont know if you can seal plywood?? I chosed pine for the looks Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.