Spry Posted January 17, 2011 Share Posted January 17, 2011 I'm going to be placing a euro skimmer into my middle chamber and wasn't sure what the best way to make a hole for the powercord would be. Is there a recommended way to protect the cord from the plastic? Link to comment
burtbollinger Posted January 17, 2011 Share Posted January 17, 2011 cord would just do an up and over & out routine...no need for a hole. Link to comment
Spry Posted January 17, 2011 Author Share Posted January 17, 2011 cord would just do an up and over & out routine...no need for a hole. I still have the hood though, and the skimmer is going in the chamber. Link to comment
burtbollinger Posted January 17, 2011 Share Posted January 17, 2011 the cord will be able to feed thru an existing notch that's cut in the hood for cords....preexisting cord notches should already exist on a JBJ...or use snips or a dremel to cut a new notch. Link to comment
Spry Posted January 17, 2011 Author Share Posted January 17, 2011 they only give u 2 holes, 1- heater 2- pump I'll make a trip to home depot and look for a dremel. Thank you! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.