J-Ranko Posted November 22, 2010 Share Posted November 22, 2010 ==================DISCLAIMER==================== The following PVC overflow design is NOT flood-proof. While it has worked reliably in my experience, I make no claims or promises about its reliability or robustness in general. Please make sure you have a back-up mechanism in place in case the overflow is clogged or the siphon is broken. Use this design at your own risk. ============================================= OK, now that that's out of the way... I know some people have been asking for these for a while now, so sorry for the delay. It's taken a while because of two things: 1) I've been working on some 3D renderings of the device itself, and 2) procrastination. I decided I'm going to show the design in three parts. First is the overflow itself, second will be the return, and third will be the return and overflow combined. Here are the rendered images of the overflow: Individual parts to be outlined in the next post... Link to comment
This topic is now archived and is closed to further replies.