scottyreef Posted June 12, 2008 Share Posted June 12, 2008 i have noticed that a lot of people are using frag squares insted of frag plugs. i want to know were to buy them. so i can cut some of my sps to start propagating. Link to comment
dtfleming Posted June 12, 2008 Share Posted June 12, 2008 Home depot, lowes, their pretty much marble tiles cut down. Link to comment
lakshwadeep Posted June 12, 2008 Share Posted June 12, 2008 there was a how-to thread on cutting the marble tiles into frag squares a while ago... Link to comment
scottyreef Posted June 12, 2008 Author Share Posted June 12, 2008 will this work is 12x12 Porcelain Tile so 1x1 squares what do you guys think Link to comment
lakshwadeep Posted June 12, 2008 Share Posted June 12, 2008 Here's Prop's description of making the frag squares (which fit into eggcrate): Ok....So I got time to frag some birdsnest and some millepora and snapped some pic soff to show you how I do it. What you will need: I like to use two types of marble tiles you can get from Lowes. The large ris about 7/8" x7/8" x 1/4" thick and the smaller is about 3/8" x 3/8" x 1/4" thick. The smaller tiles are simply AWSOME to use in egg crate ! I use my Rotary tool to bevel the sides so they fit into the eggcrate. Now if you are going to try to do this like I am and use them in eggcrate buy the smaller tiles 1st and then hunt for your eggcrate. All eggcrate is NOT created equal. Some have larger squares and these will fall right through. The Eggcrate at Home depot seems to work fine though. Take one already beveled and test fit before you buy just the same though. When you bevel these DO NOT DO IT INDOORS. Just one of these suckers will coat your hands and the entire area your in with a thin coat of calcium carbonite dust. Do it outside then rinse them off. Link to comment
scottyreef Posted June 12, 2008 Author Share Posted June 12, 2008 i found the Fragging with Prop: SPS tread http://www.nano-reef.com/forums/index.php?showtopic=155383 thanks guys Link to comment
scottyreef Posted August 22, 2008 Author Share Posted August 22, 2008 Oops sorry didnt mean to post Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.