mohsen24 Posted February 9, 2008 Share Posted February 9, 2008 i have a CPR cs50 on a 46g works great but heres my problem. i have a mag7 and rio 2100 hooked up on a single return line with a SCWD, i have too much water coming in and not enough going down. can i drill out the bottom of of overflow and use a larger bulkhead to increase the outflow? or is this a structural problem to the overflow itself.. any comments are welcome please help me solve this one... Link to comment
medachef Posted February 9, 2008 Share Posted February 9, 2008 i have a CPR cs50 on a 46g works great but heres my problem. i have a mag7 and rio 2100 hooked up on a single return line with a SCWD, i have too much water coming in and not enough going down. can i drill out the bottom of of overflow and use a larger bulkhead to increase the outflow? or is this a structural problem to the overflow itself.. any comments are welcome please help me solve this one... tee off the return so that some of the return water goes back to the sump.... use a ball valve to control the amount that gets diverted to the sump. MAke sense?? or just use only one return pump.... Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.