nano-paul Posted January 10, 2007 Share Posted January 10, 2007 SO I have all this glass lying around that I never use (own a glass shop) so I thought I would put it to use. Excuse me while I go drill some holes MUHAHAHAHA!!! Link to comment
nano-paul Posted January 10, 2007 Author Share Posted January 10, 2007 I know it! Its great! Hole drilled Bulkhead installed (exuse the blurry picture) More to come later tonight................. Link to comment
Bobalouy Posted January 10, 2007 Share Posted January 10, 2007 Wow, looks like you have the right tools. Have any Starphire laying around? Link to comment
nano-paul Posted January 10, 2007 Author Share Posted January 10, 2007 Wow, looks like you have the right tools. Have any Starphire laying around? I can get it. It costs me $8.00 a square foot with a 3' minumum for 1/4". Would sell it for $9.00 a square foot plus shipping if you tell me the sizes you need I do a pretty good acrylic job too..... Link to comment
IPv6Freely Posted January 10, 2007 Share Posted January 10, 2007 What does regular glass cost you? Do 3 sides and the bottom in glass, and the front in starphire... Looking for a 36w 12d 16h 30gallon..... Link to comment
nano-paul Posted January 10, 2007 Author Share Posted January 10, 2007 BSDameon: That would cost you about $80.00 plus shipping and box fee. I am not sure of the shipping and box fee, but I am looking for you. 1/4" clear glass = $3.50 sq. ft. 1/4" low iron = $9.00 sq. ft. Where are you located and I can price shipping to you Link to comment
nano-paul Posted January 11, 2007 Author Share Posted January 11, 2007 Assembly Before you ask why that silicone is white, its a 100% high modulous silicone that goes on white and dries clear. Same ingredients as AGA's aquarium seal. Link to comment
purebullet417 Posted January 11, 2007 Share Posted January 11, 2007 would you be willing to make sumps to i might be looking for a custom glass one in the feature Link to comment
nano-paul Posted January 11, 2007 Author Share Posted January 11, 2007 would you be willing to make sumps to i might be looking for a custom glass one in the feature Would be willing to try. If tell me how big you want it and where you want your baffles I will look and see what I can do. Link to comment
supernip Posted January 11, 2007 Share Posted January 11, 2007 Id be willing to pay you the 9/square foot if you can cut it for me Link to comment
nano-paul Posted January 11, 2007 Author Share Posted January 11, 2007 Id be willing to pay you the 9/square foot if you can cut it for me PM sent Link to comment
nano-paul Posted January 11, 2007 Author Share Posted January 11, 2007 My AP24 at my office. Never shown it so thought I would. Link to comment
CharAznable Posted April 5, 2007 Share Posted April 5, 2007 1. Can you send custom length cut sheets? 2. How much would the total cost be for the following pieces to ship to Gurnee, IL 60031: (1) 20"x 24" Clear Glass (side) (1) 20"x 24" Low-iron (starphire) Glass (side) (1) 60" x 24" Low-iron (starphire) Glass (front) (1) 60" x 24" Clear Glass (back) (1) 60" x 20.5" Clear Glass (bottom) Link to comment
Maco Posted April 5, 2007 Share Posted April 5, 2007 Wow nice tank and that white silicone is awsome. -Mac Link to comment
nano-paul Posted April 5, 2007 Author Share Posted April 5, 2007 1. Can you send custom length cut sheets? 2. How much would the total cost be for the following pieces to ship to Gurnee, IL 60031: (1) 20"x 24" Clear Glass (side) (1) 20"x 24" Low-iron (starphire) Glass (side) (1) 60" x 24" Low-iron (starphire) Glass (front) (1) 60" x 24" Clear Glass (back) (1) 60" x 20.5" Clear Glass (bottom) WOW! I thought this thread was dead I will get back to you on that. I had a guy walk in off the street and buy this tank. I never even got to set it up. Link to comment
CharAznable Posted April 5, 2007 Share Posted April 5, 2007 I recently decided to explore the DIY approach to Aquariums and had mentioned it on RC. They said that you are the guy to talk to! Link to comment
CharAznable Posted April 6, 2007 Share Posted April 6, 2007 I just realized I forgot to mention the thickness. 1/4" if it will work for the tank height I am after. If that isn't sufficient thickness let me know what prices would work for the 3/8" or 1/2" sheets. Thanks! Link to comment
crrichey Posted April 7, 2007 Share Posted April 7, 2007 Ahahaha, you brought a horrible storm apon yourself Link to comment
CharAznable Posted April 9, 2007 Share Posted April 9, 2007 Yeah. Now that I think about it 3/8" or 1/2" might be better. Would you have any prices for those?? Link to comment
Snazzy Posted April 9, 2007 Share Posted April 9, 2007 Hey nanopaul you said you do acylic also? how much a square foot for 1/4" cheapest extruded(sp?) stuff. i saw you bending job how much is that to be done? Link to comment
nano-paul Posted April 9, 2007 Author Share Posted April 9, 2007 Come on guys, send me a PM. I cant do this out in the open. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.