ngericke Posted July 23, 2004 Share Posted July 23, 2004 Just got done with my 2x13w wifey didnt want to see alot wires so I had to clean it up a bit Here is how it ended up Link to comment
ngericke Posted July 23, 2004 Author Share Posted July 23, 2004 I took the ballasts out of a couple bayco lights and put them in a junction box and added a switch to it Link to comment
ngericke Posted July 23, 2004 Author Share Posted July 23, 2004 I cut down a 3 wire extension cord to run between the hood and the ballast box Pretty easy to do and not very much $$ Can be done for under $40 Link to comment
lakedawgs Posted July 26, 2004 Share Posted July 26, 2004 Where did you get the Bayco 13w ballast. Great post! thanks, Lakedawgs Link to comment
sdbeazley Posted July 26, 2004 Share Posted July 26, 2004 You can get them at Walmart in the tool section. It is sold as a shop light. Many home improvement stores also have them Link to comment
TheRiners Posted August 2, 2004 Share Posted August 2, 2004 Hey, That looks great! I was wondering were you got the reflectors and clips for the lights. Thanks! Jeremy Link to comment
The Unit Posted August 2, 2004 Share Posted August 2, 2004 could have bought the same if not better looking from petsupplyliquidator for 35 and ship...just a thought Link to comment
ngericke Posted August 30, 2004 Author Share Posted August 30, 2004 I did buy one of those from PSL but it came with a workhorse 5 The 13w bulbs have an internal starter and a WH wont fire them correctly or consistantly Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.